User manual

Table Of Contents

MATRICE 200

SERIES User Manual

Linking the Remote Controller

The remote controller comes linked to your aircraft before delivery. Linking is only required when

using for the remote controller for the rst time. Follow these steps to link a remote controller:

1. Power on the remote controller, connect to your mobile device, and launch DJI GO 4.

2. Power on the Intelligent Flight Battery.

3. Enter the Camera View and tap the Linking Remote Controller button shown below.

4. The DJI GO 4 app will display a countdown box, the remote controller will be ready to link, with

its display showing Connecting and a beeping sound being emitted.

5. Locate the Linking button on the aircraft and press the Linking button to start linking. The remote

controller display shows the current status information. The primary remote controller shows the

aircraft status, and the secondary remote controller shows the camera settings.