User manual

Table Of Contents

MATRICE 200

SERIES User Manual

2. Mount the Zenmuse XT onto the aircraft by securing the gimbal adapter.

Single Downward Gimbals

The dual downward gimbal connector is mounted onto the aircraft at the factory. To use the M210

or M201 RTK’s single downward gimbals it is necessary to rst remove the dual downward gimbal

connector and mount the single downward gimbal connector.

1. Detach the dual downward gimbal connector from the aircraft by gently removing the three

damping balls from their sockets.

2. Remove the four screws on the top of the dual downward gimbal connector.