User manual

100
©
2022 DJI All Rights Reserved.
MATRICE 30 SERIES User Manual
RNG positioning is limited by factors such as the GNSS positioning accuracy and gimbal
attitude accuracy. The GNSS position, horizontal distance, Navigation Display, and AR
projection are provided for reference only.
When the zoom camera is aiming, the cross hairs will be an upright cross, while with the
wide-angle camera or thermal camera it will turn into an X.
1
2
Smart Track
Introduction
When operating the gimbal camera, the pilot can use Smart Track to identify, lock and track targets such
as people, vehicles, boats, or other objects. After recognizing and locking the target, it will automatically
rotate the gimbal to situate the target in the center of the screen, and adjust the camera focal length to
an appropriate focus rate to track and view the target.
When the tracked target is set to objects, the tracking eect will be limited.
Use Smart Track in an open environment to avoid blocking the target.
When the aircraft is returning to the Home Point, landing or set to T-mode, Smart Track will
be disabled. The device will exit Smart Track immediately in any of the above situations.
Identifying and Locking a Target
Smart Track can be enabled after entering zoom view in the app.
1. Tap to start or stop Smart Track.
2. The feature identies a person, vehicle, or boat as the target. Alternatively, you can gesture on the
screen to select another object as the target.