User manual
Table Of Contents
- Using This Manual
- Product Profile
- Flight Safety
- Aircraft
- Remote Controller
- Starting and Activating the Remote Controller
- Remote Controller Overview
- Mounting the WB37 Intelligent Battery
- Mounting the Dongle
- Mounting the Strap and Bracket Kit
- Adjusting the Antennas
- IP Rating
- User Interface
- Video Transmission
- Remote Controller LEDs and Alert
- Charging the Remote Controller and Checking the Battery Level
- Linking the Remote Controller and Control Stick Modes
- Buttons Overview
- Flight Mode Switch (N/S/F)
- Calibrating the Compass
- HDMI Settings
- Advanced Dual Operator Mode
- Intelligent Battery Station
- Intelligent Flight Battery
- DJI Pilot 2 App
- Firmware Update
- Appendix
109
©
2022 DJI All Rights Reserved.
MATRICE 30 SERIES User Manual
Mission Flight
Tap on the homepage of DJI Pilot 2 to enter the mission library. The user can view created mission
ight routes, or newly created Waypoint, Mapping, Oblique, or Linear Flight missions. The above four
types of missions are generated by the app; Waypoint ights can also be created through Live Mission
Recording.
Linear Flight
Waypoint Mapping Oblique
Set Waypionts Live Mission
Recording
Waypoint Mapping Oblique
Set Waypionts Live Mission
Recording
Mission Flight Introduction
The mission ight function is illustrated below with Waypoint ights as an example.
Waypoint ights can be planned in of two ways: Set Waypoints and Live Mission Recording. Use Set
Waypoints to create a route by adding editable waypoints on the map. Use Live Mission Recording to
create a route by adding waypoints and editing the target in photos captured along the route.