User manual
Table Of Contents
- Using This Manual
- Product Profile
- Flight Safety
- Aircraft
- Remote Controller
- Starting and Activating the Remote Controller
- Remote Controller Overview
- Mounting the WB37 Intelligent Battery
- Mounting the Dongle
- Mounting the Strap and Bracket Kit
- Adjusting the Antennas
- IP Rating
- User Interface
- Video Transmission
- Remote Controller LEDs and Alert
- Charging the Remote Controller and Checking the Battery Level
- Linking the Remote Controller and Control Stick Modes
- Buttons Overview
- Flight Mode Switch (N/S/F)
- Calibrating the Compass
- HDMI Settings
- Advanced Dual Operator Mode
- Intelligent Battery Station
- Intelligent Flight Battery
- DJI Pilot 2 App
- Firmware Update
- Appendix
19
©
2022 DJI All Rights Reserved.
MATRICE 30 SERIES User Manual
Battery Level Warning Description Flight Instructions
Low Battery RTH
The remaining battery
level is only enough for the
aircraft to y to the Home
Point safely.
If RTH is selected, the aircraft will y to the Home
Point automatically and landing protection will be
enabled. Regain control of the aircraft and land it
manually during RTH.
The warning will not appear again after
choosing not to use RTH. Decide carefully and
ensure ight safety.
Auto Landing
The remaining battery
level is only enough for the
aircraft to descend from its
current altitude.
The aircraft will land automatically and the landing
protection will be enabled.
Estimated Remaining
Flight Time
Estimated remaining ight
time of the aircraft is based
on its current battery level.
N/A
Low Battery Level
Warning
Tap
and tap in
camera view to set the
low battery level threshold
value.*
Long beeps will sound from the remote controller.
The user can still control the aircraft.
Critical Low Battery
Level Warning
Tap
and tap in
camera view to set the
critical low battery level
threshold value. *
Short beeps will sound from the remote controller.
The user can still control the aircraft. It is unsafe to
continue ying the aircraft. Land immediately.
* The threshold value is dierent from that of Low Battery RTH or auto landing.
During auto landing, the user can push the throttle stick to make the aircraft hover at its
current altitude or ascend, moving the aircraft to a more suitable landing location.
The colored zones and the estimated remaining ight time on the battery level indicator are
automatically adjusted according to the aircraft’s current location and status.