User manual
Table Of Contents
- Using This Manual
- Product Profile
- Flight Safety
- Aircraft
- Remote Controller
- Starting and Activating the Remote Controller
- Remote Controller Overview
- Mounting the WB37 Intelligent Battery
- Mounting the Dongle
- Mounting the Strap and Bracket Kit
- Adjusting the Antennas
- IP Rating
- User Interface
- Video Transmission
- Remote Controller LEDs and Alert
- Charging the Remote Controller and Checking the Battery Level
- Linking the Remote Controller and Control Stick Modes
- Buttons Overview
- Flight Mode Switch (N/S/F)
- Calibrating the Compass
- HDMI Settings
- Advanced Dual Operator Mode
- Intelligent Battery Station
- Intelligent Flight Battery
- DJI Pilot 2 App
- Firmware Update
- Appendix
2
©
2022 DJI All Rights Reserved.
User Manuals, instructions and other material about product functions and specics are DJI condential
Materials. Users are licensed to use these materials only for purposes of operating and using DJI
Products. Unless otherwise authorized in this Terms, you are not eligible to use or allow others to use
the Materials or any part of the Materials by reproducing, transferring or selling the Materials. Users
should only refer to this document and the content thereof as instructions to operate DJI UAV. The
document should not be used for other purposes.
Searching for Keywords
Search for keywords such as “battery” and “install” to nd a topic. If you are using Adobe
Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to
begin a search.
Navigating to a Topic
View a complete list of topics in the table of contents. Click on a topic to navigate to that section.
Printing this Document
This document supports high resolution printing.
Version Date Revisions
v1.2 2022.7 Updated DJI AirSense and rear indicator descriptions.
Revision Log