User manual
Table Of Contents
- Using This Manual
- Product Profile
- Flight Safety
- Aircraft
- Remote Controller
- Starting and Activating the Remote Controller
- Remote Controller Overview
- Mounting the WB37 Intelligent Battery
- Mounting the Dongle
- Mounting the Strap and Bracket Kit
- Adjusting the Antennas
- IP Rating
- User Interface
- Video Transmission
- Remote Controller LEDs and Alert
- Charging the Remote Controller and Checking the Battery Level
- Linking the Remote Controller and Control Stick Modes
- Buttons Overview
- Flight Mode Switch (N/S/F)
- Calibrating the Compass
- HDMI Settings
- Advanced Dual Operator Mode
- Intelligent Battery Station
- Intelligent Flight Battery
- DJI Pilot 2 App
- Firmware Update
- Appendix
44
©
2022 DJI All Rights Reserved.
MATRICE 30 SERIES User Manual
Gimbal Down
The gimbal pan rotates to the center to be consistent with the aircraft
heading, and the gimbal tilt changes to -90° from the current position.
Gimbal Pan Recenter
The gimbal pan rotates to the center to be consistent with the aircraft
heading while the gimbal tilt remains unchanged.
Gimbal Tilt Down
The gimbal pan remains unchanged while the gimbal tilt changes to
-90° from the current position.
Make sure that there is nothing obstructing the gimbal’s movements. DO NOT tap or knock the
gimbal after the aircraft is powered on. Launch the aircraft from open and at ground to protect
the gimbal during takeo.