User manual
Table Of Contents
- Using This Manual
- Product Profile
- Flight Safety
- Aircraft
- Remote Controller
- Starting and Activating the Remote Controller
- Remote Controller Overview
- Mounting the WB37 Intelligent Battery
- Mounting the Dongle
- Mounting the Strap and Bracket Kit
- Adjusting the Antennas
- IP Rating
- User Interface
- Video Transmission
- Remote Controller LEDs and Alert
- Charging the Remote Controller and Checking the Battery Level
- Linking the Remote Controller and Control Stick Modes
- Buttons Overview
- Flight Mode Switch (N/S/F)
- Calibrating the Compass
- HDMI Settings
- Advanced Dual Operator Mode
- Intelligent Battery Station
- Intelligent Flight Battery
- DJI Pilot 2 App
- Firmware Update
- Appendix
46
©
2022 DJI All Rights Reserved.
MATRICE 30 SERIES User Manual
IP Rating
1. Under stable laboratory conditions, the M30/M30T achieves an IP55 protection rating by IEC
60529 standards when equipped with TB30 Intelligent Flight Batteries. The protection rating is not
permanent, however, and may reduce over an extended period.
a. DO NOT y when the amount of rainfall exceeds 100 mm in 24 hours.
b. DO NOT fold the frame arms in the rain. Make sure the aircraft is free of any liquid by wiping
it carefully before storing in the carrying case.
c. Make sure the battery ports, battery compartment ports, battery surfaces, and battery
compartment surfaces are dry before inserting the batteries.
d. Make sure the ports and surfaces of the battery are free from any liquid before charging.
e. The product warranty does not cover water damage.
2. The aircraft does not achieve IP55 protection rating in the following circumstances:
a. Frame arms are folded.
b. Batteries other than the M30/M30T TB30 Intelligent Flight Batteries are used.
c. The cover for the ports are not attached correctly.
d. The waterproong top shell plug is not rmly attached to the top shell.
e. The aircraft is broken in situations such as where the aircraft shell is cracked or the
waterproof adhesive is not secure.
3. The aircraft body uses ame retardant materials to improve safety performance, which may lead the
color of the appearance to be changed. Such change does not aect the performance and the IP
rating of the aircraft.
PSDK Port
The PSDK port on the top of the aircraft enables developers to connect PSDK payloads and develop
more expansion functions. Visit https://developer.dji.com/ for more information about SDK development.
Visit https://www.dji.com/matrice-30/downloads to learn more about the PSDK Mounting Bracket.