User manual
Table Of Contents
- Using This Manual
- Product Profile
- Flight Safety
- Aircraft
- Remote Controller
- Starting and Activating the Remote Controller
- Remote Controller Overview
- Mounting the WB37 Intelligent Battery
- Mounting the Dongle
- Mounting the Strap and Bracket Kit
- Adjusting the Antennas
- IP Rating
- User Interface
- Video Transmission
- Remote Controller LEDs and Alert
- Charging the Remote Controller and Checking the Battery Level
- Linking the Remote Controller and Control Stick Modes
- Buttons Overview
- Flight Mode Switch (N/S/F)
- Calibrating the Compass
- HDMI Settings
- Advanced Dual Operator Mode
- Intelligent Battery Station
- Intelligent Flight Battery
- DJI Pilot 2 App
- Firmware Update
- Appendix
48
©
2022 DJI All Rights Reserved.
Remote Controller
Starting and Activating the Remote Controller
Powering On/O
Press once and then press again and hold for two seconds to power the remote controller on or o.
Activating the Remote Controller
Internet
The remote controller needs to be activated before rst use. Make sure the remote controller has
access to the internet during activation.
Follow the steps below to activate the remote controller:
1. Power on the remote controller. Select a language option and tap Next. Read the Terms of Use and
Privacy Policy carefully and tap Agree, then select your country/region.
2. Connect to a Wi-Fi network to access the internet. Then set the time zone, date, and time.
3. If you have a DJI account, log in with your password. If you are a new user, create a DJI account and
log in.
4. After logging in, tap Activate on the activation interface.
5. A prompt will appear on the screen, indicating that the remote controller is activated.
6. After activating the remote controller, choose if you would like to join the DJI Product Improvement
Project. Join this project to help DJI better understand your needs.
Check the internet connection if the activation fails. Make sure internet access is available and
try activating the remote controller again. Contact DJI Support if the activation fails multiple
times.