User manual

50
©
2022 DJI All Rights Reserved.
MATRICE 30 SERIES User Manual
16
17
18
19
25
26
27
28
3 0
29
21
22
23
24
31 31
2 0 2 0
15. Flight Pause Button
Press once to have the aircraft brake and
hover in place (only when GNSS or vision
systems are available).
16. C3 Button
Customize functions in DJI Pilot 2.
17. Left Dial
Controls the tilt of the gimbal.
18. Record Button
Press once to start or stop recording.
19. Flight Mode Switch
For switching between three flight modes:
N-mode (Normal), S-mode (Sport), and
F-mode (Function). F-mode can be set to
A-mode (Attitude) or T-mode (Tripod) in DJI
Pilot 2.
20. Internal RC Antennas
Transmit aircraft control and video wireless
signals. DO NOT block the internal RC
antennas during usage. Otherwise, the signal
may be aected.
21. microSD Card Slot
For inserting a microSD card.
22. USB-A Port
When flying with a Matrice series aircraft,
users can connect the remote controller to a
BS30 intelligent battery station for firmware
updates. Users can also insert third-party
devices, such as a USB flash drive or a
memory card.
23. HDMI Port
For outputting HDMI signal to an external
monitor.
24. USB-C Port
For charging the remote controller.
25. Focus/Shutter Button
Press the button halfway down for autofocus
and all the way down to take a photo.
26. Right Dial
Controls the pan of the gimbal.
27. Scroll Wheel
For adjusting camera zoom.
28. Handle
29. Speaker
30. Air Vent
For heat dissipation. DO NOT block the air
vent during usage.