User manual

74
©
2022 DJI All Rights Reserved.
MATRICE 30 SERIES User Manual
5. Insert the batteries into the battery ports to start charging.
A. For WB37 batteries, the battery station will charge the battery with the most power rst.
B. For TB30 batteries, their charging sequence is illustrated below.
a. Between paired and singular batteries, paired batteries will be charged rst. (Figure a)
b. Where there are multiple battery pairs (each formed by a top and bottom battery in the
sequence of A, B, C and D), the pair with the highest power will be charged rst. (Figure b)
c. If none of the batteries are paired, the two batteries with the highest power will be charged
rst. (Figure c)
10% 30%
20%
40%30%10%
10%
30%
30%
(Figure a) (Figure b) (Figure c)
Will charge rst.
When the power of the paired batteries are not the same, the battery station will charge the
one with less power rst.
Connect the maintenance port to the remote controller USB-A port to update the rmware or
diagnose the errors for battery station and batteries.
The battery station will automatically warm up a TB30 battery to 18° C (64.4° F) before
charging if the temperature of the battery is lower than 10° C (50° F) when inserted.
When the WB37 battery is charged at the same time, the TB30 battery charging time will be
slightly prolonged.
Battery Level: 20%
Standard Mode
Ready-to-Fly Mode
30 min
12 min
90% 100%