User manual
Table Of Contents
- Using This Manual
- Product Profile
- Flight Safety
- Aircraft
- Remote Controller
- Starting and Activating the Remote Controller
- Remote Controller Overview
- Mounting the WB37 Intelligent Battery
- Mounting the Dongle
- Mounting the Strap and Bracket Kit
- Adjusting the Antennas
- IP Rating
- User Interface
- Video Transmission
- Remote Controller LEDs and Alert
- Charging the Remote Controller and Checking the Battery Level
- Linking the Remote Controller and Control Stick Modes
- Buttons Overview
- Flight Mode Switch (N/S/F)
- Calibrating the Compass
- HDMI Settings
- Advanced Dual Operator Mode
- Intelligent Battery Station
- Intelligent Flight Battery
- DJI Pilot 2 App
- Firmware Update
- Appendix
87
©
2022 DJI All Rights Reserved.
MATRICE 30 SERIES User Manual
1
2
Preight Check View
Tap Enter Camera View on the homepage of DJI Pilot 2 to enter Preight Check view.
1. View the aircraft's health information, ight mode, intelligent ight battery level, remote controller role,
remote controller internal and external battery levels, Home Point status, RTK status, and camera
microSD card storage information.
2. Set the return-to-home altitude, out-of-control action, maximum altitude and maximum flight
distance, update the Home Point, select the control stick mode, and set the battery warning
threshold, obstacle sensing switches and obstacle sensing distances.
It is recommended to carefully conduct the preflight check according to the operation
scenario and requirements before takeo.
Before executing a mission ight, conduct a preight check and verify the basic parameter
information of the mission ight. Refer to the Mission Flight section for details.