User manual
Table Of Contents
- Using This Manual
- Product Profile
- Flight Safety
- Aircraft
- Remote Controller
- Starting and Activating the Remote Controller
- Remote Controller Overview
- Mounting the WB37 Intelligent Battery
- Mounting the Dongle
- Mounting the Strap and Bracket Kit
- Adjusting the Antennas
- IP Rating
- User Interface
- Video Transmission
- Remote Controller LEDs and Alert
- Charging the Remote Controller and Checking the Battery Level
- Linking the Remote Controller and Control Stick Modes
- Buttons Overview
- Flight Mode Switch (N/S/F)
- Calibrating the Compass
- HDMI Settings
- Advanced Dual Operator Mode
- Intelligent Battery Station
- Intelligent Flight Battery
- DJI Pilot 2 App
- Firmware Update
- Appendix
90
©
2022 DJI All Rights Reserved.
MATRICE 30 SERIES User Manual
13. RTH Altitude (RTH): displays the RTH altitude congured by the ight controller setting.
14. Absolute Altitude (ASL): displays the absolute altitude of the aircraft.
15. Navigation Display: shows the aircraft and gimbal orientation, and obstacle avoidance information
from a top-down perspective. Refer to the Navigation Display section for more details.
Navigation Display
1 2 3 4
5 6
9 10
7
8
Navigation Display only shows the speed, altitude and other information on the left and right sides
in gimbal camera view. In FPV camera view, such information is shown in the form of Primary Flight
Display.
1. Aircraft: Navigation Display rotates with the aircraft.
2. Aircraft Horizontal Speed Vector: The white line drawn by the aircraft indicates the ight direction
and speed of the aircraft.
3. Aircraft Orientation: displays the current orientation of the aircraft. The displayed degree is counted
clockwise from the north, with the north assumed as 0 degrees and the step length being 30
degrees. For example, the number 24 in the compass indicates the heading of the aircraft after a
240-degree clockwise rotation from 0 degrees.
4. Gimbal Orientation: displays the orientation of the gimbal relative to the aircraft in real time. The icon
rotates with the gimbal.
5. Home Point and Remote Controller Orientations:
a. Displays the home position relative to the aircraft. When the Home Point horizontal
distance exceeds 16 m, the Home Point icon will stay on the edge of the Navigation
Display.
b. When the relative distance between the Home Point and the remote controller is no more
than 5 meters, only the Home Point will be displayed in Navigation Display. When the
relative distance is more than 5 meters, the remote controller will be displayed as a blue
dot to indicate its position. When the horizontal distance between the remote controller
and the aircraft exceeds 16 meters, the remote controller position icon will stay on the
edge of Navigation Display.