User manual
Table Of Contents
- Using This Manual
- Product Profile
- Aircraft
- Profile
- Flight Mode
- Flight Status Indicator
- Aircraft Beacons
- Aircraft Auxiliary Lights
- Vision System and Infrared Sensing System
- Return-to-Home (RTH)
- Center of Gravity Calibration
- Flight Recorder
- Propellers
- Intelligent Battery Station
- Intelligent Flight Battery
- DJI Intelligent Flight Battery Functions
- D-RTK
- DJI AirSense
- Expansion Ports
- IP45 Protection Rating
- Remote Controller
- Gimbal and Camera
- DJI Pilot App
- Flight
- Appendix
10
©
2020 DJI All Rights Reserved.
MATRICE 300 RTK User Manual
2
11
3
Mounting the Gimbal and Camera
Press the Gimbal
Detachment button
to remove the cover.
Align the white and
red dots and insert the
gimbal.
Rotate the gimbal lock
to the locked position.
After installation, make sure that the gimbal lock is locked in place.
Make sure to press down the Gimbal Detachment button when rotating the gimbal lock to
remove the gimbal and camera. The gimbal lock should be fully rotated when removing the
gimbal for the next installation.
Mounting the Intelligent Flight Batteries / Checking the Battery Level
Insert a pair of batteries.
Press the battery level button once to check the battery level.
Turning On the Aircraft
Turn on / off:
Press the power button on the aircraft, within 3 seconds press
again and hold to turn on / o the aircraft, with the power indicator solid on.
Link:
Press and hold the aircraft's power button at least ve seconds to link
the aircraft and Smart Controller. The power indicator will blink during linking.
If for any unforeseeable circumstances, that only one battery is available during ight, land the
aircraft immediately and replace the batteries as soon as possible.
The PSDK and OSDK ports have built-in temperature sensors. If the device temperature is
too high due to too large payload power, the aircraft will automatically power o the payload
for protection.
Make sure to use the included batteries. DO NOT use any other type of batteries.
Low
High