User manual
Table Of Contents
- Using This Manual
- Product Profile
- Aircraft
- Profile
- Flight Mode
- Flight Status Indicator
- Aircraft Beacons
- Aircraft Auxiliary Lights
- Vision System and Infrared Sensing System
- Return-to-Home (RTH)
- Center of Gravity Calibration
- Flight Recorder
- Propellers
- Intelligent Battery Station
- Intelligent Flight Battery
- DJI Intelligent Flight Battery Functions
- D-RTK
- DJI AirSense
- Expansion Ports
- IP45 Protection Rating
- Remote Controller
- Gimbal and Camera
- DJI Pilot App
- Flight
- Appendix
28
©
2020 DJI All Rights Reserved.
MATRICE 300 RTK User Manual
Using the 2195 propellers for extended periods will reduce the motor life.
Only use DJI approved propellers. DO NOT mix propeller types.
Ensure to check that the propellers and motors are installed rmly and correctly before each
ight.
Ensure that all propellers are in good condition before each flight. DO NOT use aged,
chipped, or broken propellers.
To avoid injury, stand clear of and DO NOT touch propellers or motors when they are spinning.
Replacing the Propellers
In order to replace the propellers, use the H2.5 hex key with ball-end.
It is recommended to replace the propellers only in an emergency situation during operations. After the
emergency ight is over, please contact DJI technical support or an authorized agent for overhaul as
soon as possible.
Propeller blades are sharp; please handle with care.
Intelligent Battery Station
The Battery Station features a total of 12 battery ports and can charge up to eight TB60 Intelligent Flight
Batteries, and four WB37 Intelligent Batteries. It also comes built in with integrated wheels that make
the Battery Station easy to maneuver from one place to another.
Warnings
1. Keep any liquids (oil, water etc.) away from the inside of the Battery Station.
2. DO NOT close the Battery Station during charging or discharging, and ensure it is well ventilated and
able to dissipate heat.
3. The Battery Station is only compatible with the TB60 Intelligent Flight Battery, and WB37 Intelligent
Battery. DO NOT use the Battery Station with any other battery models.
4. Place the Battery Station on a at and stable surface when in use. Ensure the device is properly
insulated to prevent re hazards.
5. DO NOT touch the metal terminals on the Battery Station. If there is any noticeable debris buildup,
wipe the metal terminals with a clean, dry cloth.
6. Take care to avoid injuring fingers when opening or closing the Battery Station, or using the
retractable trolley handle.