User manual
Table Of Contents
- Using This Manual
- Product Profile
- Aircraft
- Profile
- Flight Mode
- Flight Status Indicator
- Aircraft Beacons
- Aircraft Auxiliary Lights
- Vision System and Infrared Sensing System
- Return-to-Home (RTH)
- Center of Gravity Calibration
- Flight Recorder
- Propellers
- Intelligent Battery Station
- Intelligent Flight Battery
- DJI Intelligent Flight Battery Functions
- D-RTK
- DJI AirSense
- Expansion Ports
- IP45 Protection Rating
- Remote Controller
- Gimbal and Camera
- DJI Pilot App
- Flight
- Appendix
42
©
2020 DJI All Rights Reserved.
Remote Controller
Prole
The DJI Smart Controller Enterprise (hereinafter referred to as “Smart Controller”) features OcuSync
Enterprise technology, capable of controlling aircraft that supports this technology, and providing a live HD
view from the aircraft's camera. It can transmit image data at distances of up to 9.32 mi (15 km) and comes
with a number of aircraft and gimbal controls as well as some customizable buttons. *
The built-in 5.5-inch high brightness 1000 cd/m² screen has a resolution of 1920×1080 pixels, featuring
an Android system with multiple functions such as Bluetooth and GNSS. In addition to supporting Wi-Fi
connectivity, it is also compatible with other mobile devices for more exible usage. The Smart Controller has
a maximum working time of 2.5 hours with the built-in battery. When using the WB37 Intelligent Battery, the
maximum working time can be e xtended to 4.5 hours. **
* The Smart Controller can reach maximum transmission distance (FCC) in an unobstructed area with no
electromagnetic interference at an altitude of about 400 feet (120 meters). The actual maximum transmission
distance may be less than the distance mentioned above due to interference in the operating environment, and
the actual value will uctuate according to the strength of interference.
** Maximum operating time is estimated in a lab environment at room temperature, for reference only. When the
Smart Controller is powering other devices, the run time will be reduced.
Compliance Standards:
The remote controller is compliant with local laws and regulations.
Stick Mode:
Controls can be set to Mode 1, Mode 2, or to a custom mode.
Do NOT operate more than three aircrafts within the same area (roughly the size of a soccer
eld) to prevent transmission interference.
Preparing the Remote Controller
Charging
Charging the Remote Controller
When turned o (using the standard USB charger at room temperature), it takes approximately 2 hours
and 15 minutes to fully charge the Smart Controller.
Power Outlet
(100 - 240 V)
USB Charger USB-C Cable
Please use the ocial USB Charger to charge the Smart Controller. When a standard USB
Charger is not available, it is recommended to use an FCC / CE certied USB power adapter
rated 12 V / 2 A.
Please recharge the battery at least every three months to prevent over discharging - the
battery will deplete when stored for an extended period.