User manual
Table Of Contents
- Using This Manual
- Product Profile
- Aircraft
- Profile
- Flight Mode
- Flight Status Indicator
- Aircraft Beacons
- Aircraft Auxiliary Lights
- Vision System and Infrared Sensing System
- Return-to-Home (RTH)
- Center of Gravity Calibration
- Flight Recorder
- Propellers
- Intelligent Battery Station
- Intelligent Flight Battery
- DJI Intelligent Flight Battery Functions
- D-RTK
- DJI AirSense
- Expansion Ports
- IP45 Protection Rating
- Remote Controller
- Gimbal and Camera
- DJI Pilot App
- Flight
- Appendix
©
2020 DJI All Rights Reserved.
65
MATRICE 300 RTK User Manual
1. Back
: Tap this icon to return to the main menu.
2. System Status Bar
In-Flight (GPS)
: This icon indicates aircraft ight status and displays various warning messages.
3. Battery Level Indicator Bar
: The battery level indicator provides a dynamic display of the battery level. The colored
zones on the battery level indicator represent the power levels needed to carry out different
functions.
4. Flight Mode
: The text next to this icon indicates the current ight mode. Tap to congure the Flight Controller
settings. These settings allow you to modify ight limits and set gain values.
The following updates are in eect when using an aircraft rmware version of v03.00.01.01 or
later:
1. Introduced Coordinated Turn.
2. The satellite positioning system can be switched between BeiDou and GPS+GLONASS.
3. Increased the height limit to 1,500 m except when within 50 km of airport. The increased
height limit only lasts while the aircraft is powered on. The height limit will return to 500 m
when restarting the aircraft.
5. GNSS Signal Strength
: Shows the current GNSS signal strength. “R” will be displayed on the lower right corner if the
aircraft RTK is enabled.
6. Obstacle Sensing Function Status
: Displays the status for all sensing systems.
If the direction of the corresponding sensing system is working normally, then it is displayed in green,
otherwise it is displayed in red. All green indicates that the six-direction sensing system is working
normally, and all red indicates that the sensing system is not yet in eect. Please y carefully.
7. Remote Controller Signal
: This icon shows the strength of the remote controller signal. The icon will blink when an
interference is recognized during ight. When there are no additional warnings in DJI Pilot, it means
that the interference will not aect operation and overall ight experience. When in Advanced Dual
Operator Mode, this icon will show as
.
8. HD Video Link Signal Strength
2.4G
: This icon shows the strength of the HD video downlink connection between the aircraft and
the remote controller. The text on top indicates the frequency in use. Tap for image transmission
settings.
9. Battery Settings
: Shows the current battery level. Tap to view the battery information menu, set the
various battery warning thresholds, and view the battery warning history.
10. More Settings
Tap
to enter the extended menu to view and adjust the parameters of all other settings.
: Flight Controller Settings — Includes Flight Mode Switch, Home Point settings, Return to
Home altitude, maximum altitude, distance limit, sensors state, remote controller signal lost action,