User manual
Table Of Contents
- Using This Manual
- Product Profile
- Aircraft
- Profile
- Flight Mode
- Flight Status Indicator
- Aircraft Beacons
- Aircraft Auxiliary Lights
- Vision System and Infrared Sensing System
- Return-to-Home (RTH)
- Center of Gravity Calibration
- Flight Recorder
- Propellers
- Intelligent Battery Station
- Intelligent Flight Battery
- DJI Intelligent Flight Battery Functions
- D-RTK
- DJI AirSense
- Expansion Ports
- IP45 Protection Rating
- Remote Controller
- Gimbal and Camera
- DJI Pilot App
- Flight
- Appendix
66
©
2020 DJI All Rights Reserved.
MATRICE 300 RTK User Manual
center of gravity auto calibration.
: Perception Settings — Includes enabling obstacle sensing, vision positioning, and RTH
obstacle detection, etc.
: Remote Controller Settings — Includes stick mode, custom settings, remote controller
calibration, linking, etc.
: Image Transmission Settings — Includes work frequency, channel mode and video output, etc.
: Aircraft Battery Settings — Includes low battery warning thresholds, battery information, etc.
: Gimbal Settings — Includes gimbal pitch and pan settings, TapZoom magnication (for the Z30
gimbal and camera), gimbal calibration, etc.
RTK : RTK Settings — Includes RTK positioning function, RTK service type and their corresponding
settings.
: Common Settings — Includes ight route display, units of measurement, live stream, etc.
11. Message Box
: Tap to read all warning messages.
12. Gimbal Oreintation Adjustment
: Tap to select the Gimbal Orientation Adjustment as Gimbal Recenter, Recenter Gimbal Yaw,
Gimbal Yaw Downward or Gimbal Downward.
13. Beacon
: Tap to turn on / o the beacons. Will change to Discreet Mode icon once turned on.
14. Multiple Gimbal Control
: Tap to enable Multiply Gimbal Control, you can control two or three gimbals’ Pitch and yaw.
15. Smart Track
: Tap to enable Smart Track. Read the Smart PIN & Track section for more information.
16. PIN Point
: Tap to record a location. Read the Smart PIN & Track section for more information.
17. Laser Ranging
R
N
G
: Tap to enable Laser Rangender. Read the Smart PIN & Track section for more information.
18. Camera and Zoom
ZOOM 5.0X
: Displays the current camera and its zoom rate.
19. Camera Parameters
100 1/1000 0
: Displays the current camera parameters.
20. Focus Mode
AF-C
: Tap to Switch the Focus Mode, with MF, AFC and AFS supported.
21. Auto Exposure Lock
AE
: Tap to lock the exposure value.
22. Infrared Camera View Switch Button
IR
: Tap to switch to infrared camera.
23. Wide Camera View Switch Button
WIDE
: Tap to switch to wide camera.