User manual
Table Of Contents
- Using This Manual
- Product Profile
- Aircraft
- Profile
- Flight Mode
- Flight Status Indicator
- Aircraft Beacons
- Aircraft Auxiliary Lights
- Vision System and Infrared Sensing System
- Return-to-Home (RTH)
- Center of Gravity Calibration
- Flight Recorder
- Propellers
- Intelligent Battery Station
- Intelligent Flight Battery
- DJI Intelligent Flight Battery Functions
- D-RTK
- DJI AirSense
- Expansion Ports
- IP45 Protection Rating
- Remote Controller
- Gimbal and Camera
- DJI Pilot App
- Flight
- Appendix
©
2020 DJI All Rights Reserved.
77
MATRICE 300 RTK User Manual
Mission Flight
Introduction
Tap to enter the mission library. Users can view created flight routes, or newly created Waypoint,
Mapping, Oblique, or Linear Flight missions. The above four missions are generated by the app and the
Waypoint ight can be created through Live Mission Recording.
Waypoint Mapping Oblique
Set Waypionts Live Mission
Recording
Use Set Waypoints to create a route by adding editable waypoints on the map. Use Live Mission
Recording to create a route by adding waypoints and edit the target in the photo along the route.
Moreover, users can also edit the mission during ights, when in ight editing mode.
There are two functions which can be achieved:
Waypoints 2.0: Edit and save the waypoints before takeo then start ying.
AI Spot-check: Edit and save the waypoints during ight, the mission will be saved after ight.
Waypoint Mapping Oblique
Set Waypionts Live Mission
Recording
Linear Flight