User manual

©
2020 DJI All Rights Reserved.
79
MATRICE 300 RTK User Manual
1. Tap C1 to pin a point or capture a photo, the waypoint number and the photo number will increase.
2. Waypoint number.
3. Photo number.
4. Tap to enter the map page for editing. Tap
to save current settings, and a ight route is created.
When used with the H20 series gimbal and camera, tap Next to enter the AI Spot-check page for
editing.
AI Spot-check
When pairing the M300 RTK with the H20 series payload, AI Spot-check is available. In AI Spot-check
page, you can switch from dierent photos, drag-select photos and adjust the size. When the route is
executed, the selected object will be accurately photographed.
a. Back.
b. Displays the waypoint number and the photo number.
c. Displays the gimbal and lens of the photo.
d. Photo thumbnails, tap to select the photo that needs to be edited accurately. The photo has been
edited by AI Spot-check, and is marked with
.
e. Gesture to select the object in the photo, adjust the selection box size, drag or delete the selection
box, and the selection box will follow the picture so as to enlarge or reduce. Tap once on the picture
to hide / show other buttons and tools on the screen.
f. Tap to save the flight route settings and the AI Spot-check configurations, and a flight route is
created.
ISO
100
Shutter
1/1000
EV
0
123456
N
H
340
222m
H
130.2
ALT
m
VS2.5
ASL1234.5
(m/s)
10 X
2 X
5 X
ZOOM
RNG
C1
AEAF-C
19:29
GPS
12
2.4G
80%
100%
26.1v
26.1v
IR
WIDE
ZOOM 5.0X
Waypiont 2
Photos 1
In-Flight（GPS）
1
2
3
4
1
9. Perform
: Tap the button and then check the settings and status of the aircraft in the pop-up checklist.
Tap the “Start to Fly”button to perform the mission.
10. Save
: Tap to save current settings.
Live Mission Recording
Tap Create a Route, Waypoint ight, and then Live Mission Recording to record actions such as photo
capture.