User manual
Table Of Contents
- Using This Manual
- Product Profile
- Aircraft
- Profile
- Flight Mode
- Flight Status Indicator
- Aircraft Beacons
- Aircraft Auxiliary Lights
- Vision System and Infrared Sensing System
- Return-to-Home (RTH)
- Center of Gravity Calibration
- Flight Recorder
- Propellers
- Intelligent Battery Station
- Intelligent Flight Battery
- DJI Intelligent Flight Battery Functions
- D-RTK
- DJI AirSense
- Expansion Ports
- IP45 Protection Rating
- Remote Controller
- Gimbal and Camera
- DJI Pilot App
- Flight
- Appendix
82
©
2020 DJI All Rights Reserved.
MATRICE 300 RTK User Manual
1. Error displays
Check the current health status of each module of the aircraft, and the user can solve the
corresponding abnormality according to the prompt.
Color Status Color Status
Green Normal Orange Caution
Yellow Notice Red Warning
2. Error records
Records of historical data of the aircraft are used to conrm whether there are any serious problems
during the use of the aircraft. This makes it convenient for the user to evaluate the stability of the
aircraft and assist after-sales when conducting an analysis.
3. Manage logs
Maintain recent aircraft logs. This data can be is used to identify aircraft abnormalities and enhance
aircraft management. Users can directly send the logs to the DJI after-sales team through the App.
4. Maintenance instructions
Users can view historical ight data and the maintenance manual, then be able to determine whether
maintenance is required.
The following updates are in eect when using an aircraft rmware version of v03.00.01.01 or later:
1. Added DJI Care Enterprise and DJI Maintenance Program.
2. Error Records are available for the battery and battery station (battery station must be
connected to the remote controller via the USB-C cable).
3. Manage Logs available for the battery and battery station (battery station must be connected
to the remote controller via the USB-C cable).
Intelligent Battery Station Status Query and Log Management
To check the battery station status in HMS in DJI Pilot (v3.0.1.1 or above), set the remote controller to
USB External Device in Quick Settings and connect the battery station to the remote controller via a
UBS-C cable. Users can also update the battery station rmware and export battery logs in batches.
Checking the Battery Station Status
Run DJI Pilot, tap HMS to enter, and check the battery station status. If a warning appears, tap it for
more detailed information and follow the prompts to resolve the issue.