User manual
Table Of Contents
- Using This Manual
- Product Profile
- Aircraft
- Profile
- Flight Mode
- Flight Status Indicator
- Aircraft Beacons
- Aircraft Auxiliary Lights
- Vision System and Infrared Sensing System
- Return-to-Home (RTH)
- Center of Gravity Calibration
- Flight Recorder
- Propellers
- Intelligent Battery Station
- Intelligent Flight Battery
- DJI Intelligent Flight Battery Functions
- D-RTK
- DJI AirSense
- Expansion Ports
- IP45 Protection Rating
- Remote Controller
- Gimbal and Camera
- DJI Pilot App
- Flight
- Appendix
86
©
2020 DJI All Rights Reserved.
MATRICE 300 RTK User Manual
The GEO System is for advisory purposes only. Individual users are responsible for checking ocial
sources and determining which laws or regulations may apply to their ight. In some instances, DJI
has selected widely-recommended general parameters (such as a 1.5-mile radius at airports) without
making any determination as to whether these guidelines match regulations that apply to specic users.
GEO Zone Denitions
Warning Zones:
Users receive a warning message with information relevant to their ight.
Enhanced Warning Zones:
Users receive a prompt from the GEO System at the time of ight. They are
required to submit an unlock request to y in the zone, for which they must conrm their ight path.
Authorization Zones:
Users receive a warning message and the flight is prohibited by default.
Authorization Zones can be unlocked by authorized users with a DJI-veried account. Self-Unlocking
privileges must be applied for online.
Altitude Zones:
Flights are limited to a specic altitude.
Restricted Zones:
Flights are completely prohibited. UAVs cannot fly in these zones. If you have
obtained permission to y in a Restricted Zone, please go to https://www.dji.com/ysafe or contact
ysafe@dji.com to unlock the zone.
DJI GEO Zones aim to ensure the user’s flight safety, but it cannot be guaranteed to be in full
compliance with local laws and regulations. Users should check local laws, regulations, and regulatory
requirements before each ight and are responsible for the ight safety.
All intelligent flight features will be affected when DJI aircraft fly nearby or into GEO Zones. Such
interference includes, but is not limited to, decreased speed, takeo failure, and ight termination.
Flight Restrictions
Introduction
UAV operators should abide by all flight regulations established by the relevant government and
regulatory agencies, including the ICAO and the FAA. For safety reasons, flights are restricted by
default, which helps users operate DJI products safely and legally. Flight restrictions include altitude and
distance limits, and GEO Zones.
When Global Navigation System Service (GNSS) is available, altitude limits, distance limits, and GEO
Zones are all taken into account to ensure ight safety. Otherwise, only altitude limits take eect.
Maximum Altitude & Radius Restrictions
Maximum ight altitude restricts an aircraft’s ight altitude, while maximum radius restricts its distance.
These limits can be set using the DJI Pilot app.