User manual
Table Of Contents
- Using This Manual
- Product Profile
- Aircraft
- Profile
- Flight Mode
- Flight Status Indicator
- Aircraft Beacons
- Aircraft Auxiliary Lights
- Vision System and Infrared Sensing System
- Return-to-Home (RTH)
- Center of Gravity Calibration
- Flight Recorder
- Propellers
- Intelligent Battery Station
- Intelligent Flight Battery
- DJI Intelligent Flight Battery Functions
- D-RTK
- DJI AirSense
- Expansion Ports
- IP45 Protection Rating
- Remote Controller
- Gimbal and Camera
- DJI Pilot App
- Flight
- Appendix
88
©
2020 DJI All Rights Reserved.
MATRICE 300 RTK User Manual
GEO Zone Description
Restricted Zone
Takeo: The aircraft’s motors cannot be started.
In-ight: When GNSS signal changes from weak to strong, DJI Pilot starts
a countdown. Once the countdown is over, the aircraft immediately lands in
semi-automatic descent mode and turns o its motors after landing.
In-ight: When the aircraft approaches the boundary of the Restricted Zone,
it automatically decelerates and hovers.
Authorization Zone
Takeo: The aircraft’s motors cannot be started. Takeo is only available
after submitting an unlock request with the user’s phone number.
In-ight: When GNSS signal changes from weak to strong, DJI Pilot starts
a countdown. Once the countdown is over, the aircraft immediately lands in
semi-automatic descent mode and turns o its motors after landing.
Enhanced Warning Zone The aircraft ies normally but the user is required to conrm the ight path.
Warning Zone The aircraft ies normally but the user receives warning messages.
Altitude Zone
When GNSS signal is strong, the aircraft cannot exceed the specied
altitude.
In-ight: When GNSS signal changes from weak to strong, if the aircraft is
higher than the height limit, the aircraft will descend and hover below the
altitude limit.
When the GNSS signal is strong, the aircraft approaches the boundary of
the Altitude Zone. If it is higher than the altitude limit, the aircraft decelerates
and hovers in place.
GEO Zone Flight Restrictions
Semi-Automatic Descent: All stick commands are available except the throttle command
and RTH button during descent and landing. The aircraft’s motors turn off automatically
after landing. It is recommended to y the aircraft to a safe location to land immediately.