User manual
Table Of Contents
- Using This Manual
- Product Profile
- Aircraft
- Profile
- Flight Mode
- Flight Status Indicator
- Aircraft Beacons
- Aircraft Auxiliary Lights
- Vision System and Infrared Sensing System
- Return-to-Home (RTH)
- Center of Gravity Calibration
- Flight Recorder
- Propellers
- Intelligent Battery Station
- Intelligent Flight Battery
- DJI Intelligent Flight Battery Functions
- D-RTK
- DJI AirSense
- Expansion Ports
- IP45 Protection Rating
- Remote Controller
- Gimbal and Camera
- DJI Pilot App
- Flight
- Appendix
90
©
2020 DJI All Rights Reserved.
MATRICE 300 RTK User Manual
GEO Unlocking
Due to diering laws and regulations between countries and regions, and diering ight restrictions be-
tween GEO Zones, DJI provides users with two methods for unlocking GEO Zones: Self-Unlocking and
Custom Unlocking.
Self-Unlocking is used for Authorization Zones, where the user is required to submit an unlock request
by authenticating their phone number for a registered DJI account. This feature is only available in cer-
tain countries. Users can choose whether to submit their unlock request via the website at https://www.
dji.com/ysafe (Scheduled Self-Unlocking), or through the DJI Pilot app (Live Self-Unlocking).
Custom Unlocking is based on special requirements for individual users. It sets a special ight area that
users can unlock by providing ight permission les according to their specic GEO Zone and other
requirements. It is available in all countries and can be applied for on the website: https://www.dji.com/
ysafe.
For more information about unlocking, please visit
https://www.dji.com/ysafe or contact ysafe@dji.com.
Preight Checklist
1. Make sure the remote controller and the aircraft batteries are fully charged.
2. Make sure the arms are unfolded and the arm sleeves, the landing gears, and the batteries are
locked to the indicated positions.
3. Make sure the motors and the propellers are securely mounted so the motors can rotate smoothly
and the propellers are not damaged or deformed.
4. Make sure the rmware of all devices are updated to the latest ocial version.
5. Make sure the failsafe setting satises the requirements of the pilot. It is strongly recommended to set
the failsafe setting as return to home.
6. Set an appropriate altitude for return to home according to the ight environment to ensure a safe
ight when returning to the home point.
7. Make sure that the pilot is familiar with and comfortable using the control stick mode.
8. Make sure obstacle avoidance is enabled and the obstacle avoidance setting is appropriate.
9. Divide the airspace for ight when multiple aircraft are operating simultaneously in order to avoid
collision mid-air.
Calibrating the Compass
Only calibrate the compass when the DJI Pilot app or the status indicator prompts you to do so.
Observe the following rules when calibrating your compass:
DO NOT calibrate your compass where there is a chance of strong magnetic interference,
such as near magnets, parking structures, or steel reinforcements underground.
DO NOT carry ferromagnetic materials with you during calibration such as cellular phones.
The DJI Pilot app will notify you if the compass is affected by strong interference after
calibration is complete. Follow the prompts to resolve the compass issue.