User manual
Table Of Contents
- Using This Manual
- Product Profile
- Aircraft
- Profile
- Flight Mode
- Flight Status Indicator
- Aircraft Beacons
- Aircraft Auxiliary Lights
- Vision System and Infrared Sensing System
- Return-to-Home (RTH)
- Center of Gravity Calibration
- Flight Recorder
- Propellers
- Intelligent Battery Station
- Intelligent Flight Battery
- DJI Intelligent Flight Battery Functions
- D-RTK
- DJI AirSense
- Expansion Ports
- IP45 Protection Rating
- Remote Controller
- Gimbal and Camera
- DJI Pilot App
- Flight
- Appendix
©
2020 DJI All Rights Reserved.
99
MATRICE 300 RTK User Manual
Using the Dual Gimbal Connector
The Matrice 300 RTK Dual Gimbal Connector is used to mount a compatible payload to the bottom of
the Matrice 300 RTK aircraft. Its design gives it an IP44 Ingress Protection (only when equipped with a
waterproof payload), in accordance with the global IEC 60529 standard.
1. Remove the single downward gimbal connector.
Using the Upward Gimbal Connector
The Matrice 300 RTK Upward Gimbal Connector is used to mount a compatible payload to the top of
the Matrice 300 RTK aircraft. Its design gives it an IP44 Ingress Protection (only when equipped with a
waterproof payload), in accordance with the global IEC 60529 standard.