Operation Manual

MATRICE 600

User Manual

DO NOT damage the fan cable when removing the upper cover of the center frame.

Mount the GPS with an extension rod to avoid interference from power system.

Ensure the extension rod is rm and stable before each ight.

Avoid catching your ngers in the collapsible mount when folding for transportation.

Mounting the Upper and Lower Covers of the Center Frame

1. Connect the fan cable (with a JST 4-pin connector) to the fan port on the upper cover rst, and then

re-mount the upper cover. Make sure the arrow on it is pointing toward the front of the aircraft (M1,

M2) and DO NOT damage the cables. Insert the upper cover into the slots on the upper plate. Be

sure you hear audible clicks, which indicate a proper lock.

Fan

Upper Cover

Fan Cable

Slot

CAN HUB

CAN1 Port

GPS Cable

4. Plug the GPS cable into the CAN1 port on the ight controller.

5. Attach the CAN HUB of the GPS module onto the upper plate of the center frame. Then insert the

GPS cable into the slot on the upper plate of the center frame.

6. Fix the GPS cable onto the extension rod using tape.

Aircraft’s Front