Operation Manual

MATRICE 600

User Manual

After any of the above protection issues are resolved, press the power button to turn off the Battery

Level Indicator. Unplug the Intelligent Flight Battery from the battery charger and plug it back in to

resume charging. Note that you do not need to unplug and plug the battery charger in the event of a

charging temperature error; the battery charger will resume charging when the temperature falls within

the normal range.

DJI does NOT take any responsibility for damage caused by third-party battery chargers.

Calibrating the Battery Capacity:

To effectively calibrate the capacity of the Intelligent Flight Battery, it is recommended to

charge and discharge the battery thoroughly for every 10 charge-and-discharge cycles.

Choose one of the following methods to discharge battery. After discharging the battery, fully

charge the battery to nish the calibration.

Slow:

Place the battery into the Matrice 600’s battery compartment and power it on. Leave it

on until there is less than 5% battery level, or until it can no longer be turned on. Check the

battery level in the DJI GO app.

Fast:

Fly the Matrice 600 outdoors until there is less than 5% battery level, or until the battery

can no longer be turned on.