Operation Manual
56
©
2016 DJI All Rights Reserved.
MATRICE 600
User Manual
Using the Charging Hub
Following the instructions below to use the Charging Hub:
1. Connecting to a Power Source
Connect the standard Matrice 600 Battery Charger to a power outlet (100-240V 50/60Hz), then
connect the Charging Hub to the Matrice 600 Battery Charger.
2. Connecting Batteries
Insert the Intelligent Flight Battery into the charging port to begin charging. The Intelligent Flight
Battery with the highest power level will be fully charged rst. Other batteries will be charged in
the same manner, according to their power levels. Refer to the “Status LED Indicator Description”
section for more information about the Status LEDs’ blinking patterns. Unplug the batteries when
they are fully charged.
When charging more than one Intelligent Flight Battery, distribute them as evenly as
possible among the charging slots.
DO NOT touch the metal terminals. DO NOT leave the metal terminals exposed to open air
when they are not in use.
Status LED Indicator Description
Status LED Indicator Description
Blinking Green
Charging
—— Solid Green
Fully charged
Blinking Red
Abnormal power supply, please check the connection to the Battery
Charger
—— Solid Red
No battery connected to this port
—— Solid Yellow
The battery is not charging
Upgrading the Firmware
The rmware update program has an “exe” extension. Visit the Matrice 600 page on the ofcial DJI
website to check if there is a rmware upgrade.
1. Download the latest rmware upgrade from the ofcial DJI website.
(http://www.dji.com/product/matrice600/info#downloads)
2. Turn on the Charging Hub, then connect it to a computer using a Micro USB cable.
Battery Charger
Charging Hub
Power Outlet