Operation Manual

MATRICE 600

User Manual

Camera Operation

Use the Shutter and Record button on the remote controller to shoot images or the videos through the DJI

GO app. For more information on how to use these buttons, refer to Controlling the Camera (p. 24).

ND Filter

Attach an ND lter to the front of the camera to reduce over exposure and the ‘jello’ effect.

Gimbal

Gimbal Prole

The 3-axis gimbal provides a steady platform for the camera, allowing you to capture stable video and

images. The gimbal can tilt the camera up to 120 degrees and rotate 320 degrees.

320°

-320°

30°

-90°

0°

Under the default settings, turn the gimbal dial on the remote controller to tilt the camera. Note that

you cannot simultaneously tilt and pan the camera in the Single Remote Controller mode. Enable the

Master-and-Slave mode in the DJI GO app and set a second remote controller to Slave if you wish to

tilt and pan the camera together.

Gimbal Dial Settings

Follow the instructions below to use the gimbal dial to tilt/pan the camera:

1. Power on the aircraft and the remote controller.

2. Go to the DJI GO app > Camera View > > Remote Controller Settings.

3. Set the customizable button C1 or C2 as the Gimbal Pitch/Yaw.

Remote Controller Settings

Remote Controller Calibration

Stick Mode

Button Customization

Gimbal Pitch/YawC1

C2 Not Defined

Default stick mode is Mode 2, changing stick modes alters the way the aircraft is controlled.

Do not change unless familiar with your new mode.

You can customize the C1 and C2 buttons on the back of the RC.

Linking Remote Controller