User Manual v1.0 2022.
Searching for Keywords Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search. Navigating to a Topic View a complete list of topics in the table of contents. Click on a topic to navigate to that section. Printing this Document This document supports high resolution printing.
Using this manual Legend Important Hints and Tips Reference Read Before the First Flight Read the following documents before using the DJITM Mini 3: 1. Safety Guidelines 2. Quick Start Guide 3. User Manual It is recommended to watch all tutorial videos on the official DJI website and read safety guidelines before using for the first time. Prepare for your first flight by reviewing the quick start guide and refer to this user manual for more information.
Contents Using this manual Legend 1 Read Before the First Flight 1 Video Tutorials 1 Download the DJI Fly App 1 Download DJI Assistant 2 (Consumer Drones Series) 1 Product Profile 5 Introduction 5 Using for the First Time 5 Diagram 8 Aircraft 12 Flight Modes 12 Aircraft Status Indicator 13 QuickTransfer 14 Return to Home 15 Vision System and Infrared Sensing System 17 Intelligent Flight Mode 19 Flight Recorder 20 Propellers 20 Intelligent Flight Battery 22 Gimbal and Ca
DJI Mini 3 User Manual Flight Flight Environment Requirements 52 Flight Limits 52 Pre-Flight Checklist 54 Auto Takeoff/Landing 54 Starting/Stopping the Motors 55 Flight Test 56 Appendix 3 52 57 Specifications 57 Firmware Update 64 Aftersales Information 65 © 2022 DJI All Rights Reserved.
Product Profile This section introduces DJI Mini 3 and lists the components of the aircraft and remote controller. 4 © 2022 DJI All Rights Reserved.
Product Profile Introduction DJI Mini 3 boasts a foldable design and an ultralight weight of less than 249 g. Featuring a Downward Vision System and an Infrared Sensing System, DJI Mini 3 can hover and fly indoors as well as outdoors and automatically initiate Return to Home (RTH). The aircraft has a maximum flight time of 38 minutes when using an Intelligent Flight Battery, and a maximum flight time of 51 minutes when using an Intelligent Flight Battery Plus.
DJI Mini 3 User Manual 2. All Intelligent Flight Batteries are in hibernation mode before shipment to ensure safety. Connect a USB charger to the USB-C port on the aircraft to charge and activate the Intelligent Flight Battery for the first time. 3. Unfold the rear arms, followed by the front arms, and then all of the propeller blades. • It is recommended to use the DJI 30W USB-C Charger or other USB Power Delivery chargers. • The maximum charge voltage for the aircraft charging port is 15 V.
DJI Mini 3 User Manual Preparing the Remote Controller Follow the steps below to prepare the DJI RC remote controller. 1. Remove the control sticks from the storage slots and mount them on the remote controller. 2. The remote controller needs to be activated before first use and an internet connection is required for activation. Press, and then press again and hold the power button to power on the remote controller. Follow the on-screen prompts to activate the remote controller.
DJI Mini 3 User Manual Activating the DJI Mini 3 Aircraft DJI Mini 3 requires activation before first use. After powering on the aircraft and remote controller, follow the on-screen prompts to activate DJI Mini 3 using DJI Fly. An internet connection is required for activation. Binding the Aircraft and Remote Controller After activation, the aircraft is bound to the remote controller automatically.
DJI Mini 3 User Manual DJI RC Remote Controller 1 2 System is available). Press and hold to initiate RTH. Press again to cancel RTH. 3 5. 4 5 7 Switch between Cine, Normal, and Sport mode. 6 6. 10 9 1. Control Sticks 3. Flight Pause/Return to Home (RTH) Button Press once to make the aircraft brake and hover in place (only when GNSS or Vision 11 Touchscreen Touch the screen to operate the remote controller. Note that the touchscreen is not waterproof. Operate with caution. 8.
DJI Mini 3 User Manual DJI RC-N1 Remote Controller 10 9 6 8 5 2 3 1. 15 12 Power Button 8. Press once to check the current battery level. Press, and then press and hold to power the remote controller on or off. 2. Flight Pause/Return to Home (RTH) Button Press once to make the aircraft brake and hover in place (only when GNSS or Vision System is available). Press and hold to initiate RTH. Press again to cancel RTH. 4.
Aircraft DJI Mini 3 contains a flight controller, video downlink system, vision systems, infrared sensing system, propulsion system, and an Intelligent Flight Battery. 11 © 2022 DJI All Rights Reserved.
Aircraft DJI Mini 3 contains a flight controller, video downlink system, downward vision system, infrared sensing system, propulsion system, and an Intelligent Flight Battery. Flight Modes DJI Mini 3 has three flight modes, plus a fourth flight mode that the aircraft switches to in certain scenarios. Flight modes can be switched via the Flight Mode switch on the remote controller.
DJI Mini 3 User Manual Aircraft Status Indicator DJI Mini 3 has two aircraft status indicators. Aircraft Status Indicator Aircraft Status Indicator Refer to the table below for more information about the aircraft status indicators.
DJI Mini 3 User Manual QuickTransfer DJI Mini 3 can connect directly to mobile devices via Wi-Fi, enabling users to download photos and videos from the aircraft to the mobile device through DJI Fly without using the DJI RC-N1 remote controller. Users can enjoy faster and more convenient downloads with a transmission rate of up to 25 MB/s. Usage Method 1: mobile device is not connected to the DJI RC-N1 remote controller. 1.
DJI Mini 3 User Manual Return to Home The Return to Home (RTH) function brings the aircraft back to the last recorded Home Point when the positioning system is functioning normally. There are three RTH modes: Smart RTH, Low Battery RTH, and Failsafe RTH. The aircraft will automatically fly back and land at the Home Point when Smart RTH is initiated, the aircraft enters Low Battery RTH, or the signal between the remote controller and the aircraft is lost.
DJI Mini 3 User Manual Failsafe RTH The action the aircraft performs once it loses the remote controller signal can be set as Return to Home, Land, or Hover in DJI Fly. If the action was set as Land or Hover, Failsafe RTH will not be activated.
DJI Mini 3 User Manual Landing Protection Landing Protection will activate during Smart RTH. 1. During Landing Protection, the aircraft will automatically detect and carefully land on suitable ground. 2. If the ground is determined unsuitable for landing, DJI Mini 3 will hover and wait for pilot confirmation. 3. If Landing Protection is not operational, DJI Fly will display a landing prompt when the aircraft descends to 0.5 m from the ground. Tap confirm or pull down on the throttle stick to land.
DJI Mini 3 User Manual • Pay attention to the flight environment. The Downward Vision System and Infrared Sensing System only work under limited conditions and cannot replace human control and judgment. During flight, always pay attention to the surrounding environment and to the warnings on DJI Fly and be responsible for and maintain control of the aircraft. • The aircraft has a max hovering altitude of 5 m if GNSS is unavailable.
DJI Mini 3 User Manual Intelligent Flight Mode QuickShots QuickShots shooting modes include Dronie, Rocket, Circle, Helix, and Boomerang. DJI Mini 3 records according to the selected shooting mode and automatically generates a short video. The video can be viewed, edited, or shared to social media from playback. Dronie: The aircraft flies backward and ascends with the camera locked on the subject. Rocket: The aircraft ascends with the camera pointing downward.
DJI Mini 3 User Manual 3. Choose a shooting mode, select your target subject in the camera view by tapping the circle on the subject or dragging a box around the subject, and tap Start to begin recording (It is recommended to choose a human as a target subject rather than a building). The aircraft will fly back to its original positon once shooting is finished. 4. Tap to access the short video or the original video. You can edit the video or share to social media after downloading.
DJI Mini 3 User Manual Attaching the Propellers Attach the propellers with marks to the motors of the arm with marks and the unmarked propellers to the motors of the arm without marks. Use the screwdriver from the aircraft package to mount the propellers. Make sure the propellers are secure. Unmarked Marked • Make sure to only use the screwdriver from the aircraft package for mounting propellers. Using other screwdrivers may damage the screws.
DJI Mini 3 User Manual Intelligent Flight Battery The DJI Mini 3 aircraft is compatible with both the DJI Mini 3 Pro Intelligent Flight Battery (BWX162-2453-7.38) and the DJI Mini 3 Pro Intelligent Flight Battery Plus (BWX162-3850-7.38). DJI Mini 3 Pro Intelligent Flight Battery is a 7.38 V, 2453 mAh battery. DJI Mini 3 Pro Intelligent Flight Battery Plus is a 7.38 V, 3850 mAh battery. The two batteries have the same structure and dimensions but different weight and capacity.
DJI Mini 3 User Manual Using the Battery Checking the Battery Level Press the power button once to check the battery level. LED1 LED2 LED3 LED4 Battery Level LEDs Power Button The battery level LEDs display the power level of the battery during charging and discharging.
DJI Mini 3 User Manual 3. To ensure optimal performance, keep the battery temperature above 20° C (68° F). 4. The reduced battery capacity in low-temperature environments reduces the wind speed resistance performance of the aircraft. Fly with caution. 5. Fly with extra caution at high sea levels. In cold environments, insert the battery into the battery compartment and turn on the aircraft to warm up before taking off. Charging the Battery Fully charge the battery before each use.
DJI Mini 3 User Manual How to Charge 1. Insert the batteries into the charging hub until there is a click. 2. Connect the charging hub to a power outlet (100-240V, 50/60 Hz) using a USB-C cable and a DJI 30W USB-C charger or other USB Power Delivery chargers. 3. The battery with the highest power level will be charged first. The rest will be charged in sequence according to their power levels. The corresponding status LEDs will display the charging status (see table below).
DJI Mini 3 User Manual Using A Charger 1. Ensure the battery has been correctly installed on the aircraft. 2. Connect the USB charger to an AC outlet (100-240V, 50/60 Hz). Use a power adapter if necessary. 3. Connect the USB charger to the charging port on the aircraft using a USB-C cable. 4. The battery level LEDs display the current battery level during charging. 5. The battery is fully charged when all the battery level LEDs emit a solid light. Remove the charger after charging is complete.
DJI Mini 3 User Manual Battery Protection Mechanisms The battery LEDs can display battery protection notifications triggered by abnormal charging conditions.
DJI Mini 3 User Manual Removing the Intelligent Flight Battery Press the textured part of the battery buckles on the sides of the battery to remove it from the compartment. 1 2 • DO NOT insert or remove the battery while the aircraft is powered on. • Make sure the battery is mounted securely. 28 © 2022 DJI All Rights Reserved.
DJI Mini 3 User Manual Gimbal and Camera Gimbal Profile The DJI Mini 3 3-axis gimbal stabilizes the camera, allowing you to capture clear and steady images and videos at high flight speed. The gimbal has a control tilt range of -90˚ to +60˚, and two control roll angles of -90˚ (portrait) and 0˚ (landscape). 60° 0° -90° Use the gimbal dial on the remote controller to control the tilt of the camera. Alternatively, do so through the camera view in DJI Fly.
DJI Mini 3 User Manual Camera DJI Mini 3 uses a 1/1.3-in CMOS sensor. The aperture of the camera is F1.7 and shoots from 1 m to infinity. The DJI Mini 3 camera can take 12MP stills and supports shooting modes such as Single, AEB, Timed Shot and Panorama. It also supports recording 4K videos. • Make sure the temperature and humidity are suitable for the camera during use and storage. • Use a lens cleanser to clean the lens to avoid damage or poor image quality.
Remote Controller This section describes the features of the remote controller and includes instructions for controlling the aircraft and the camera. 31 © 2022 DJI All Rights Reserved.
Remote Controller DJI RC When used with DJI Mini 3, DJI RC remote controller features OcuSync 2.0 video transmission, works at both 2.4 GHz and 5.8 GHz frequency bands. It is capable of selecting the best transmission channel automatically and can transmit 720p 30fps HD live view from the aircraft to the remote controller at a distance of up to 10 km (6 mi) (compliant with FCC standards, and measured in a wide open area without interference). The DJI RC is also equipped with a 5.
DJI Mini 3 User Manual Controlling the Gimbal and Camera Focus/Shutter Button: Press halfway down to autofocus and press all the way down to take a photo. Record Button: Press once to start or stop recording. Camera Control Dial: Adjust the zoom. Camera Control Dial Gimbal Dial Record Button Focus/Shutter Button Gimbal Dial: Control the tilt of the gimbal.
DJI Mini 3 User Manual The default control mode of the remote controller is Mode 2. In this manual, Mode 2 is used as the example to illustrate how to use the control sticks. • Stick Neutral/Center Point: Control sticks are in the center. • Moving the control stick: The control stick is pushed away from the center position. Remote Controller (Mode 2) ( Aircraft Indicates Nose Direction) Remarks Throttle Stick: Moving the left stick up or down changes the aircraft’s altitude.
DJI Mini 3 User Manual Flight Mode Switch Toggle the switch to select the desired flight mode. Position Flight Mode S Sport Mode N Normal Mode C Cine Mode CNS Flight Pause/RTH Button Press once to make the aircraft brake and hover in place. Press and hold the button until the remote controller beeps to start RTH, the aircraft will return to the last recorded Home Point. Press this button again to cancel RTH and to regain control of the aircraft.
DJI Mini 3 User Manual Battery Level LEDs Blinking Pattern Battery Level 75%~100% 50%~75% 25%~50% 1%~25% Remote Controller Alert The remote controller beeps when there is an error or warning. Pay attention when prompts appear on the touch screen or in DJI Fly. Slide down from the top and select Mute to disable all alerts, or slide the volume bar to 0 to disable some alerts. The remote controller sounds an alert during RTH. The RTH alert cannot be cancelled.
DJI Mini 3 User Manual Linking the Remote Controller The remote controller is already linked to the aircraft when purchased together as a combo. Otherwise, follow the steps below to link the remote controller and the aircraft after activation. 1. Power on the aircraft and the remote controller. 2. Launch DJI Fly. 3. In camera view, tap 4. Press and hold the power button on the aircraft for more than four seconds. The aircraft will beep once when it is ready to link.
DJI Mini 3 User Manual Operations Slide from the left or right to the center of the screen to return to the previous screen. Slide up from the bottom of the screen to return to DJI Fly. ×2 Slide down from the top of the screen to open the status bar when in DJI Fly. The status bar displays the time, Wi-Fi signal, battery level of the remote controller, etc. Slide down twice from the top of the screen to open Quick Settings when in DJI Fly. Quick Settings 2 1 3 4 5 1.
DJI Mini 3 User Manual 2. System Settings Tap to access system settings and configure the Bluetooth, volume, network, etc. You can also view the Guide to learn more about the controls and status LEDs. 3. Shortcuts : Tap to enable or disable Wi-Fi. Hold to enter settings and then connect to or add a WiFi network. : Tap to enable or disable Bluetooth. Hold to enter settings and connect with nearby Bluetooth devices. : Tap to enable Airplane mode. Wi-Fi and Bluetooth will be disabled.
DJI Mini 3 User Manual DJI RC-N1 When used with DJI Mini 3, DJI RC-N1 features OcuSync 2.0 video transmission, works at both 2.4 GHz and 5.8 GHz frequency bands, is capable of selecting the best transmission channel automatically, and offers 720p 30fps HD live view transmission from the aircraft to DJI Fly on a mobile device (depending on mobile device performance) at a maximum transmission range of 10 km (6 mi) (compliant with FCC standards, and measured in a wide open area without interference).
DJI Mini 3 User Manual Controlling the Aircraft The control sticks control the aircraft’s orientation (pan), forward/backward movement (pitch), altitude (throttle), and left/right movement (roll). The control stick mode determines the function of each control stick movement. Three preprogrammed modes (Mode 1, Mode 2, and Mode 3) are available and custom modes can be configured in DJI Fly.
DJI Mini 3 User Manual The default control mode of the remote controller is Mode 2. In this manual, Mode 2 is used as the example to illustrate how to use the control sticks. Stick Neutral/Center Point: Control sticks are in the center. Moving the control stick: The control stick is pushed away from the center position. Remote Controller (Mode 2) ( Aircraft Indicates Nose Direction) Remarks Throttle Stick: Moving the left stick up or down changes the aircraft’s altitude.
DJI Mini 3 User Manual Flight Mode Switch Toggle the switch to select the desired flight mode. Position Sport Normal Cine Flight Mode Sport Mode Normal Mode Cine Mode Flight Pause/RTH Button Press once to make the aircraft brake and hover in place. Press and hold the button until the remote controller beeps to start RTH. The aircraft will return to the last recorded Home Point. Press this button again to cancel RTH and to regain control of the aircraft.
DJI Mini 3 User Manual Optimal Transmission Zone The signal between the aircraft and the remote controller is most reliable when the remote controller is positioned towards the aircraft as depicted below. Optimal Transmission Zone Weak Signal Linking the Remote Controller The remote controller is already linked to the aircraft when purchased together as a combo. Otherwise, follow the steps below to link the remote controller and the aircraft after activation. 1.
DJI Fly App This section introduces the main functions of the DJI Fly app. 45 © 2022 DJI All Rights Reserved.
DJI Fly App Home Launch DJI Fly and enter the home screen. Fly Spots View or share suitable flight and shooting locations nearby, learn more about GEO Zones, and preview aerial photos of different locations taken by other users. Academy Tap the icon in the top right corner to enter Academy and view product tutorials, flight tips, flight safety notices, and manual documents. Album View photos and videos on the aircraft and your mobile device or on the DJI RC remote controller.
DJI Mini 3 User Manual Camera View 1 2 3 4 5 6 19 7 8 9 10 18 11 12 13 17 1. 16 15 14 Flight Mode N Mode: Displays the current flight mode. 2. System Status Bar In Flight: Indicates the aircraft flight status and displays various warning messages. Tap to view more information when a warning prompt appears. 3. Battery Information 80 4. 24'17" : Displays the current battery level and remaining flight time.
DJI Mini 3 User Manual Unlock GEO Zone: Tap to view information about unlocking GEO Zones. The Find My Drone feature uses the map to find the location of the aircraft on the ground. Battery: Tap to view battery information such as battery cell status, serial number, and number of times charged. Advanced Safety Settings include the behavior settings for the aircraft when remote controller signals are lost and stopping the propellers mid-flight during emergencies.
DJI Mini 3 User Manual 7. Shooting Modes Photo: Single, AEB, Timed Shot. Video QuickShots: Choose from Dronie, Rocket, Circle, Helix, and Boomerang. Panorama: Choose from Sphere, 180°, and Wide Angle. 8. Landscape/Portrait Mode Switch : Tap to switch between Landscape and Portrait modes. The camera will rotate 90 degrees when switching to Portrait mode, for shooting portrait videos and photos. 9. Zoom : The icon shows the zoom ratio. Tap to adjust the zoom ratio.
DJI Mini 3 User Manual 18. Auto Takeoff/Landing/RTH / : Tap the icon. When the prompt appears, press and hold the button to initiate auto takeoff or landing. : Tap to initiate Smart RTH and have the aircraft return to the last recorded Home Point. 19. Back : Tap to return to the home screen. Tap and hold anywhere on the screen in the camera view until the gimbal adjustment bar appears. Slide on the bar to adjust the gimbal angle. Tap on the screen to enable focus or spot metering.
Flight This section describes safe flight practices and flight restrictions. 51 © 2022 DJI All Rights Reserved.
Flight After completing the pre-flight preparation, it is recommended to train your flying skills and practice flying safely. Make sure that all flights are carried out in an open area. Strictly abide by local laws and regulations when flying. Read the Safety Guidelines before flight to ensure the safe use of the product. Flight Environment Requirements 1. Do not operate the aircraft in severe weather conditions including wind speeds exceeding 10.7 m/s, snow, rain, and fog. 2. Only fly in open areas.
DJI Mini 3 User Manual Flight Altitude and Distance Limits Maximum flight altitude restricts an aircraft’s flight altitude, while maximum flight distance restricts an aircraft’s flight radius around the Home Point. These limits can be set using the DJI Fly app for improved flight safety.
DJI Mini 3 User Manual • If the aircraft reaches an altitude or radius limit, you can still control the aircraft, but you cannot fly it any further. If the aircraft flies out of the max radius, it will automatically fly back within range when the GNSS signal is strong. • For safety reasons, do not fly close to airports, highways, railway stations, railway lines, city centers, or other sensitive areas. Fly the aircraft only within your line of sight.
DJI Mini 3 User Manual Starting/Stopping the Motors Starting the Motors Perform the Combination Stick Command (CSC) as shown below to start the motors. Once the motors have started spinning, release both sticks simultaneously. OR Stopping the Motors When the aircraft is on the ground and the motors are spining, there are two ways to stop the motors: Method 1: Push the throttle stick down and hold. The motors will stop after one second. Method 2: Perform the same CSC used to start the motors and hold.
DJI Mini 3 User Manual Flight Test Takeoff/Landing Procedures 1. Place the aircraft in an open, flat area with the rear of the aircraft facing towards you. 2. Power on the remote controller and the aircraft. 3. Launch DJI Fly and enter the camera view. 4. Wait for the aircraft self-diagnostics to complete. If DJI Fly does not show any irregular warning, you can start the motors. 5. Push the throttle stick up slowly to take off. 6.
Appendix Specifications Aircraft Takeoff Weight Dimensions (L×W×H) Diagonal Distance Max Ascent Speed Max Descent Speed Max Horizontal Speed (near sea level, no wind) Max Takeoff Altitude Above Sea Level Max Flight Time Max Hovering Time Max Flight Distance Max Wind Speed Resistance Max Tilt Angle 57 © 2022 DJI All Rights Reserved. 248 g The standard weight of the aircraft (including the DJI Mini 3 Pro Intelligent Flight Battery, propellers, and a microSD card).
DJI Mini 3 User Manual Max Angular Velocity Operating Temperature GNSS Hovering Accuracy Range Transmission Video Transmission System Operating Frequency Transmitter Power (EIRP) Wi-Fi Protocol Operating Frequency Transmitter Power (EIRP) Bluetooth Protocol Operating Frequency Transmitter Power (EIRP) Gimbal Mechanical Range Controllable Range Stabilization Max Control Speed (tilt) Angular Vibration Range Sensing System Downward Vision System Operating Environment Camera Image Sensor Lens ISO 58 © 2022
DJI Mini 3 User Manual Electronic Shutter Speed Max Image Size 1/8000-2 s 4000 × 3000 Single: 12MP Interval: 12MP 2/3/5/7/10/15/20/30/60 s (JPEG) Still Photography Modes and 5/7/10/15/20/30/60 s (JPEG+RAW) Automatic Exposure Bracketing (AEB): 12MP, 3 bracketed frames Parameters at 0.7 EV Step Pano: Sphere, 180°, Wide Angle HDR Mode: HDR supported in Single Shot mode Photo Format Video Resolution Video Format Max Video Bitrate Supported File System Digital Zoom JPEG/DNG (RAW) 4K: 3840×2160@24/25/30 fps 2.
DJI Mini 3 User Manual General Operating Temperature Battery Capacity Battery Type Chemical System Operating Current/Voltage Supported Mobile Device Size Supported USB Port Types Max Battery Life -10° to 40° C (14° to 104° F) 5200 mAh Li-ion LiNiMnCoO2 1200 mA@3.6 V (with Android device) 700 mA@3.
DJI Mini 3 User Manual General Operating Temperature GNSS Battery Capacity Battery Type Chemical System Operating Current/Voltage Max Battery Life Storage Capacity Supported microSD Cards for DJI RC remote controller Recommended microSD Cards for DJI RC remote controller Intelligent Flight Battery Battery Capacity Standard Voltage Max Charging Voltage Battery Type Chemical System Energy Weight Charging Temperature Charging Time Recommended Charger 61 © 2022 DJI All Rights Reserved.
DJI Mini 3 User Manual Intelligent Flight Battery Plus Battery Capacity 3850 mAh Standard Voltage 7.38 V Max Charging Voltage 8.5 V Battery Type Li-ion Chemical System LiNiMnCoO2 Energy 28.4 Wh Weight Approx.
DJI Mini 3 User Manual • Different shooting modes may support different ISO ranges. See the actual adjustable ISO range for different shooting modes in DJI Fly.
DJI Mini 3 User Manual Firmware Update Use DJI Fly or DJI Assistant 2 (Consumer Drones Series) to update the aircraft and the remote controller firmware. Using DJI Fly When connecting the aircraft or remote controller to DJI Fly, you will be notified if a new firmware update is available. To start updating, connect your remote controller or mobile device to the internet and follow the on-screen instructions. Note that you cannot update the firmware if the remote controller is not linked to the aircraft.
DJI Mini 3 User Manual Aftersales Information Visit https://www.dji.com/support to learn more about aftersales service policies, repair services, and support. 65 © 2022 DJI All Rights Reserved.
Contact DJI SUPPORT https://www.dji.com/support This content is subject to change. Download the latest version from http://www.dji.com/mini-3 If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. is a trademark of DJI. Copyright © 2022 DJI All Rights Reserved.
