User manual

DJI Mini 3
User Manual
24
©
2022 DJI All Rights Reserved.
3. To ensure optimal performance, keep the battery temperature above 20° C (68° F).
4. The reduced battery capacity in low-temperature environments reduces the wind speed
resistance performance of the aircraft. Fly with caution.
5. Fly with extra caution at high sea levels.
In cold environments, insert the battery into the battery compartment and turn on the
aircraft to warm up before taking off.
Charging the Battery
Fully charge the battery before each use. It is recommended to use the charging devices provided
by DJI, such as the DJI Mini 3 Pro Two-Way Charging Hub, DJI 30W USB-C Charger, or other USB
Power Delivery chargers. The DJI Mini 3 Pro Two-Way Charging Hub and the DJI 30W USB-C
Charger are both optional accessories. Visit the official DJI online store for more information.
When you charge the battery mounted to the aircraft or inserted into the DJI Mini 3 Pro
Two-Way Charging Hub, the maximum charging power supported is 30 W.
Using the Charging Hub
When used with a USB charger, the DJI Mini 3 Pro Two-Way Charging Hub can charge up to
three Intelligent Flight Batteries or Intelligent Flight Batteries Plus in sequence from high to low
power level. When used with the DJI 30W USB-C Charger, the charging hub can fully charge one
Intelligent Flight Battery in approximately 56 minutes, and one Intelligent Flight Battery Plus in
approximately 78 minutes.
When the charging hub is connected to AC power through a USB charger, users can connect
both the Intelligent Flight Batteries and an external device (such as a remote controller or smart
phone) to the hub to charge. The batteries will be charged before the external device by default.
When the charging hub is not connected to AC power, insert the Intelligent Flight Batteries
into the hub and connect an external device to the USB port to charge the device, using the
Intelligent Flight Batteries as power banks. Refer to the DJI Mini 3 Pro Two-Way Charging Hub
User Guide for more details.
1234
1. USB port
2. Power Port (USB-C)
1234
3. Function Button
4. Status LEDs