User manual

DJI Mini 3

User Manual

•

Ensure the battery is inserted with a clicking sound. DO NOT launch the aircraft when

the battery is not securely mounted, as this may cause poor contact between the

battery and the aircraft and present hazards.

Battery Protection Mechanisms

The battery LEDs can display battery protection notifications triggered by abnormal charging

conditions.

Battery Protection Mechanisms

LED1 LED2 LED3 LED4 Blinking Pattern Status

LED2 blinks twice per second Overcurrent detected

LED2 blinks three times per second Short circuit detected

LED3 blinks twice per second Overcharge detected

LED3 blinks three times per second

Over-voltage charger

detected

LED4 blinks twice per second

Charging temperature is

too low

LED4 blinks three times per second

Charging temperature is

too high

If any of the battery protection mechanisms are activated, unplug the charger, and plug it in

again to resume charging. If the charging temperature is abnormal, wait for it to return to

normal and the battery will automatically resume charging without the need to unplug and plug

the charger again.

Inserting the Intelligent Flight Battery

Insert the Intelligent Flight Battery or Intelligent Flight Battery Plus into the battery compartment

of the aircraft. Make sure the battery is fully inserted with a clicking sound, which indicates the

battery buckles are securely fastened.