User Manual 2021.06 v1.
Searching for Keywords Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search. Navigating to a Topic View a complete list of topics in the table of contents. Click on a topic to navigate to that section. Printing this Document This document supports high resolution printing.
Using this Manual Legend Warning Important Hints and Tips Reference Read Before the First Flight Read the following documents before using the DJITM Mini SE: 1. In the Box 2. User Manual 3. Quick Start Guide 4. Disclaimer and Safety Guidelines It is recommend to watch all tutorial videos on the official DJI website and read the disclaimer and safety guidelines before using for the first time.
Contents Using this Manual 2 Legend 2 Read Before the First Flight 2 Download the DJI Fly App 2 Video Tutorials 2 Download DJI Assistant 2 for Mavic 2 Product Profile 6 Introduction 6 Feature Highlights 6 Preparing the Aircraft 6 Preparing the Remote Controller 7 Aircraft Diagram 8 Remote Controller Diagram 8 9 Activation Aircraft 11 Flight Modes 11 Aircraft Status Indicator 12 Return to Home 12 Vision System and Infrared Sensing System 15 Intelligent Flight Mode 16 Fl
Flight Flight Environment Requirements 36 Flight Limits and GEO Zones 36 Pre-Flight Checklist 37 Auto Takeoff/Landing 38 Starting/Stopping the Motors 38 Flight Test 39 Appendix 4 36 41 Specifications 41 Calibrating the Compass 44 Firmware Update 46 After-sales information 47 © 2021 DJI All Rights Reserved.
Product Profile This section introduces DJI Mini SE and lists the components of the aircraft and remote controller. © 2021 DJI All Rights Reserved.
Product Profile Introduction Featuring a Downward Vision System and Infrared Sensing System, DJI Mini SE can hover and fly indoors as well as outdoors and Return to Home automatically. With a fully stabilized 3-axis gimbal and 1/2.3” sensor camera, DJI Mini SE shoots 2.7K video and 12 MP photos. Feature Highlights DJI Mini SE boasts a foldable design and an ultralight weight of less than 249 g.
DJI Mini SE User Manual 4. All Intelligent Flight Batteries are in hibernation mode before shipment to ensure safety. Use the USB charger to charge and activate Intelligent Flight Batteries for the first time. It is recommended to use a USB charger with a power of 18W or higher for fast-charging. It is recommended to install a gimbal protector to protect the gimbal when the aircraft is not in use. Unfold the front arms before unfolding the rear arms.
DJI Mini SE User Manual Aircraft Diagram 6 7 1 2 4 3 8 5 9 10 11 12 1. Gimbal and Camera 7. Propellers 2. Power Button 8. Antennas 3. Battery Level LEDs 9. Battery Compartment Cover 4. Downward Vision System 10. Charging Port (USB-C) 5. Infrared Sensing System 11. microSD Card Slot 6. Motors 12. Aircraft Status Indicator Remote Controller Diagram 7 1 5 6 4 8 3 2 10 11 12 9 1. Antennas Relay aircraft control and video wireless signals. movements.
DJI Mini SE User Manual aircraft is performing a QuickShot, Intelligent RTH, or auto landing, press once to make the aircraft exit the procedure and hover in place. Press and hold the button to initiate RTH. The aircraft returns to the last recorded Home Point. Press again to cancel RTH. 6. Remote Controller Cable Connect to a mobile device for video linking via the remote controller cable. Select the cable according to the mobile device. 7.
Aircraft DJI Mini SE contains a flight controller, video downlink system, vision system, propulsion system, and an Intelligent Flight Battery. 10 © 2021 DJI All Rights Reserved.
Aircraft DJI Mini SE contains a flight controller, video downlink system, vision system, propulsion system, and an Intelligent Flight Battery. Flight Modes DJI Mini SE has three flight modes: Position, Sport, and CineSmooth. Users can switch between modes in DJI Fly. Position Mode: Positon mode works best when the GPS signal is strong. The aircraft utilizes GPS and the Vision System to locate itself and stabilize. Intelligent Flight Mode is enabled in this mode.
DJI Mini SE User Manual Aircraft Status Indicator The aircraft status indicator is located at the rear of the aircraft. It communicates the status of the aircraft’s flight control system. Refer to the table below for more information about the aircraft status indicator.
DJI Mini SE User Manual Description GPS Home Point 10 The default Home Point is the first location where the aircraft received a strong or moderately strong GPS signal (where the icon shows white). It is recommended to wait until the Home Point is successfully recorded before flying. After the Home Point is recorded, the aircraft status indicator blinks green and a prompt appears in DJI Fly.
DJI Mini SE User Manual b. If the aircraft is less than 20 m from the Home Point when the RTH procedure begins, it lands immediately. 5. After reaching the Home Point, the aircraft lands and the motors stop.
DJI Mini SE User Manual Vision System and Infrared Sensing System DJI Mini SE is equipped with a Downward Vision System and Infrared Sensing System. The Downward Vision System consists of one camera and the Infrared Sensing System consists of two 3D infrared modules. The Downward Vision System and Infrared Sensing System help the aircraft maintain its current position, hover in place more precisely, and to fly indoors or in other environments where GPS is unavailable.
DJI Mini SE User Manual Follow the steps below to use the Downward Vision System 1. Make sure the aircraft is on a flat surface. Power on the aircraft. 2. The aircraft hovers in place after takeoff. The aircraft status indicator blinks green twice, which indicates the Downward Vision System is working. The max hover altitude of the aircraft is 5 m if there is no GPS. The Vision System works best when the aircraft is at an altitude from 0.5 to 10 m.
DJI Mini SE User Manual Helix: The aircraft ascends and spirals around the subject. Using QuickShots 1. Make sure that the Intelligent Flight Battery is sufficiently charged. Take off and hover at least 6.6 ft (2 m) above the ground. 2m 2. In DJI Fly, tap to select QuickShots and follow the prompts. Make sure that the user understands how to use the shooting mode and that there are no obstacles in the surrounding area. 3.
DJI Mini SE User Manual Use QuickShots at locations that are clear of buildings and other obstacles. Make sure that there are no humans, animals, or other obstacles in the flight path. Pay attention to objects around the aircraft and use the remote controller to avoid accidents with the aircraft. DO NOT use QuickShots in any of the following situations: a. When the subject is blocked for an extended period or outside the line of sight. b. When the subject is more than 50 m away from the aircraft. c.
DJI Mini SE User Manual Detaching the Propellers Use the screwdriver to detach the propellers from the motors. Propeller blades are sharp. Handle with care. The screwdriver is only used to mount the propellers. DO NOT use the screwdriver to disassemble the aircraft. If a propeller is broken, remove the two propellers and screws on the corresponding motor and discard them. Use two propellers from the same package. DO NOT mix with propellers from other packages. Only use official DJI propellers.
DJI Mini SE User Manual 8. Battery Cell Damage Protection: DJI Fly displays a warning prompt when a damaged battery cell is detected. 9. Hibernation Mode: if the battery cell voltage is lower than 3.0 V or the battery level is less than 10%, the battery enters Hibernation mode to prevent over-discharge. Charge the battery to wake it from hibernation. 10. Communication: information about the voltage, capacity, and current of the battery is transmitted to the aircraft.
DJI Mini SE User Manual 63% ＜ battery level ≤ 75% 50% ＜ battery level ≤ 63% 38% ＜ battery level ≤ 50% 25% ＜ battery level ≤ 38% 13% ＜ battery level ≤ 25% 0% ＜ battery level ≤ 13% Powering On/Off Press the power button once, then press again, and hold for two seconds to turn the battery on or off. The battery level LEDs display the battery level when the aircraft is powered on. Press the power button once and the four battery level LEDs will blink for three seconds.
DJI Mini SE User Manual The battery cannot be charged if the aircraft is powered on and the aircraft cannot be powered on during charging. DO NOT charge an Intelligent Flight Battery immediately after flight as the temperature may be too high. Wait until it cools down to room temperature before charging again. The charger stops charging the battery if the battery cell temperature is not within the operating range of 41° to 104° F (5° to 40° C). The ideal charging temperature is 71.6° to 82.
DJI Mini SE User Manual LED4 blinks twice per second Charging temperature is too low LED4 blinks three times per second Charging temperature is too high If the charging temperature protection is enabled, the battery will resume charging once the temperature has returned to within the allowable range.
DJI Mini SE User Manual DO NOT apply external force to the gimbal after the gimbal is powered on. DO NOT add any extra payload to the gimbal as this may cause the gimbal to function abnormally or even lead to permanent motor damage. Make sure to remove the gimbal cover before powering on the aircraft. Also, make sure to mount the gimbal cover when the aircraft is not in use. Flying in heavy fog or clouds may make the gimbal wet, leading to temporary failure.
Remote Controller This section describes the features of the remote controller and includes instructions for controlling the aircraft and the camera. © 2021 DJI All Rights Reserved.
Remote Controller Remote Controller Profile Built into the remote controll is DJI's enhanced Wi-Fi technology, offering 2.4 GHz and 5.8 GHz* transmission frequencies, a maximum transmission distance of 2.49 mi (4 km), and 720p video downlink from the aircraft to DJI Fly on your mobile device. The detachable control sticks make the remote controller easier to store. Refer to the remote controller diagram in the Product Profile section for more information.
DJI Mini SE User Manual Controlling the Aircraft Three pre-programmed modes (Mode 1, Mode 2, and Mode 3) are available and custom modes can be defined in the DJI Fly app. The default mode is Mode 2.
DJI Mini SE User Manual The figure below explains how to use each control stick, using Mode 2 as an example. Remote Controller (Mode 2) ( Aircraft Remarks Indicates Nose Direction) Moving the left stick up or down changes the aircraft’s altitude. Push the stick up to ascend and down to descend. The more the stick is pushed away from the center position, the faster the aircraft will change altitude. Push the stick gently to prevent sudden and unexpected changes in altitude.
DJI Mini SE User Manual Optimal Transmission Zone The signal between the aircraft and the remote controller is most reliable when the antennas are positioned in relation to the aircraft as depicted below. strong weak Linking the Remote Controller The remote controller is linked to the aircraft before delivery. Linking is only required when using a new remote controller for the first time. Follow these steps to link a new remote controller: 1. Power on the remote controller and the aircraft. 2.
DJI Fly App This section introduces the main functions of the DJI Fly app. 30 © 2021 DJI All Rights Reserved.
DJI Fly App Home Launch DJI Fly and enter the home screen. Altitude Zone (120m) Album Fly Spots Skypixel Academy Me GO FLY Fly Spots View or share nearby suitable flight and shooting locations, learn more about GEO zones, and preview aerial photos of different locations taken by other users. Academy Tap the icon in the top right corner to enter Academy. Product tutorials, flight tips, flight safety, and manual documents can be viewed here.
DJI Mini SE User Manual Camera View 1 15 2 P Mode 3 In Flight 80 4 24 26 RC 5 6 20 7 8 14 9 7.9m/s H 5m 13 1.6m/s D 625m 12 1080p 30 EV 1:30:26 +1.0 AE 10 11 1. Flight Mode P Mode: displays the current flight mode. Tap to switch between modes. 2. System Status Bar In Flight: indicates the aircraft flight status and displays various warning messages. Tap to view more information when a warning prompt appears. 3.
DJI Mini SE User Manual Ceiling above Sea Level is 1500 m and the max flight speed is limited when Payload mode is enabled. The Find My Drone feature helps to find the location of the aircraft on the ground. Control Aircraft Settings: Select Flight mode and Units settings. Gimbal Settings: Switch gimbal mode and calibrate gimbal. Advanced gimbal settings include Pitch Speed, Pitch Smoothness, and Allow Upward Gimbal Rotation. Remote Controller Settings: Stick mode settings and remote controller calibration.
DJI Mini SE User Manual 14. Auto Takeoff/Landing/RTH / landing. Tap : tap the icon. When the prompt appears, press and hold the button to initiate auto takeoff or to initiate Smart RTH and have the aircraft return to the last recorded Home Point. 15. Back : tap to return to the home screen. Press the screen until a circle appears and drag the circle up and down to control the tilt of the gimbal. Make sure to fully charge your mobile device before launching DJI Fly.
Flight This section describes safe flight practices and flight restrictions. © 2021 DJI All Rights Reserved.
Flight Once pre-flight preparation is complete, it is recommended to hone your flight skills and practice flying safely. Make sure that all flights are carried out in an open area. The flying height is limited to 500 m. DO NOT exceed this height. Strictly abide by local laws and regulations when flying. Make sure to read the DJI Mini SE Disclaimer and Safety Guidelines to understand the safety notices before flying. Flight Environment Requirements 1.
DJI Mini SE User Manual When GPS is available Flight Limits Aircraft Status Indicator DJI Fly App Max Altitude Aircraft's altitude cannot exceed the specified value Warning: Height limit reached Max Radius Flight distance must be within the max radius Warning: Distance limit reached Blinks green and red alternatively When GPS is weak Flight Limits Max Altitude Max Radius Height is restricted to 16 ft (5 m) when the GPS signal is weak and Infrared Sensing System is operating.
DJI Mini SE User Manual 4. Make sure the gimbal and camera are functioning normally. 5. Make sure nothing is obstructing the motors and that they are functioning normally. 6. Make sure DJI Fly is successfully connected to the aircraft. 7. Make sure the camera lens and Vision System sensors are clean. 8. Use only genuine DJI parts or parts certified by DJI. Unauthorized parts or parts from non-DJI certified manufacturers may cause system malfunctions and compromise safety.
DJI Mini SE User Manual 2. Method 2: When aircraft has landed, push the left stick down, then conduct the same CSC that was used to start the motors, as described above. The motors will stop immediately. Release both sticks once the motors have stopped.
Appendix 40 © 2021 DJI All Rights Reserved.
Appendix Specifications Aircraft Takeoff Weight <249 g Dimensions (L×W×H) Folded: 138×81×58 mm Unfolded: 159×203×56 mm Unfolded (with propellers): 245×289×56 mm Diagonal Distance 213 mm Max Ascent Speed 4 m/s (S Mode) 2 m/s (P Mode) 1.5 m/s (C Mode) Max Descent Speed 3 m/s (S Mode) 1.
DJI Mini SE User Manual Hovering Accuracy Range Gimbal Vertical: ±0.1 m (with Vision Positioning), ±0.5 m (with GPS Positioning) Horizontal: ±0.3 m (with Vision Positioning), ±1.5 m (with GPS Positioning) Mechanical Range Tilt: -110° to +35° Roll: -35° to +35° Pan: -20° to +20° Controllable Range Tilt: -90° to 0° (default setting), -90° to +20° (extended) Stabilization 3-axis (tilt, roll, pan) Max Control Speed (tilt) 120°/s Angular Vibration Range ±0.
DJI Mini SE User Manual Max Transmission Distance (unobstructed, free of interference) Model MR1SS5: 5.8 GHz: 4000 m (FCC); 2500 m (SRRC) ModelMR1SD25: 2.4 GHz: 2000 m (MIC/CE); 5.8 GHz: 500 m (CE) Operating Temperature Range 0° to 40° C (32° to 104° F) Transmitter Power (EIRP) Model MR1SS5: 5.8 GHz: <30 dBm (FCC); <28 dBm (SRRC) Model MR1SD25: 2.4 GHz: <19 dBm (MIC/CE) 5.8 GHz: <14 dBm (CE) Battery Capacity 2600 mAh Operating Current/Voltage 1200 mA 3.6 V (Android) 450 mA 3.
DJI Mini SE User Manual Recommended microSD Cards 16GB: SanDisk Extreme, Lexar 633x 32GB: Samsung PRO Endurance, Samsung EVO Plus, SanDisk Industrial, SanDisk Extreme V30 A1/A2, SanDisk Extreme PRO V30 A1/A2, Lexar 633x, Lexar 667x 64GB: Samsung PRO Endurance, Samsung EVO Plus, SanDisk Extreme V30 A1, Lexar 633x, Lexar 667x, Lexar 1000x, Toshiba Exceria M303 V30 A1, Netac PRO V30 A1 128GB: Samsung PRO Plus, Samsung EVO Plus, SanDisk Extreme V30 A1, SanDisk Extreme Plus V30 A1/A2, Lexar 633x, Lexar 667x, Le
DJI Mini SE User Manual If the aircraft status indicator blinks red and yellow alternatively after calibration is completed, this indicates that the current location is not suitable for flying the aircraft, due to the level of magnetic interference. Change your location. A prompt will appear in DJI Fly if compass calibration is required before takeoff. The aircraft can take off immediately once calibration is complete.
WE ARE HERE FOR YOU Contact DJI SUPPORT via Facebook Messenger This content is subject to change. Download the latest version from http://www.dji.com/mini-se If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. DJI is a trademark of DJI. Copyright © 2021 DJI All Rights Reserved.
