OSMO MOBILE User Manual V1.2 2017.
Searching for Keywords Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search. Navigating to a Topic View a complete list of topics in the table of contents. Click on a topic to navigate to that section. Printing this Document This document supports high resolution printing.
Contents Using this Manual 2 Legend 2 Install the DJI GO App 2 Introduction 4 Getting Started 5 Intelligent Battery 5 Mount and Balance the Mobile Phone 7 Optional Accessories 8 Using the Osmo Mobile 9 Controls and Operations 9 Operation Modes 12 DJI GO App 14 Download 14 Connecting to the DJI GO App 14 Key Pages 15 Upgrading the Firmware 18 18 How to Upgrade Using the Zenmuse M1 gimbal with Osmo Handle 18 Install the Zenmu
Introduction The OSMO TM Mobile is an advanced 3-axis gimbal that stabilizes and controls your smartphone, turning it into a smart motion camera. Its light and ergonomic design places physical controls at your fingertips, to form a powerful go anywhere smartphone filmmaking device. The DJI GO app brings ActiveTrack and Motion Timelapse features to the Osmo Mobile.
Getting Started Intelligent Battery The 980 mAh Intelligent Battery can power the Osmo Mobile for about 4.5 hours. Intelligent Battery Functions Battery Balancing Balances the voltage of each cell during charging. Overcurrent Protection Stops charging if the charging current is too large. Overcharge Protection Stops charging if its voltage is too high. Over-discharge Protection Stops discharging if its voltage is too low.
Osmo Mobile User Manual Inserting the Battery Slide the locking switch at the base of the Osmo Mobile to open the battery cover. Insert the battery and lock the battery cover. Charging To charge the Osmo Mobile, connect the USB adapter (not included) to the charging port using the provided power cable. The battery is fully charged when the system status LED become solid green. USB Adapter Charging Time : 3 hours (when charging at 1 A) Maximum Supported USB Charging Current: 2.
Osmo Mobile User Manual Mount and Balance the Mobile Phone 1. With the Osmo Mobile powered off, loosen the Holder Lock Knob, place the mobile phone in the mobile phone holder and tighten the knob to secure its position. 2. The system is balanced if the mobile phone remains level when released, balanced only by the gimbal.
Osmo Mobile User Manual Optional Accessories DJI provides various optional accessories for the Osmo Mobile. Osmo Base Provides a stable platform for your Osmo to stand upright. Universal Mount Used to mount external devices such as a flashlight. Extension Rod Good for taking group selfies, overhead shots or reaching into small spaces. Tripod For stationary shots that require steady footage. The tripod must be used with the Extension Rod. High Capacity Intelligent Battery Battery capacity is 1225 mAh.
Using the Osmo Mobile Controls and Operations The gimbal anticipates handle movement to smooth out pan and tilt transitions, and uses SmoothTrack technology to reduce mobile phone shakes from natural arm movements. You can position the mobile phone directly by hand. Additionally, there are buttons on the front and back of the handle that allow for finer control over the gimbal and mobile phone. All of the buttons and controls are described below.
Osmo Mobile User Manual [4] Record Button Press this button once to start recording video, and again to stop recording. Joystick Record Button Shutter Button [5] Camera Status Indicator Indicates the camera’s system status. Refer to the table below for details. Camera Status Indicator Blinking Pattern — Descriptions LED Off No device connected. Solid Blue Camera is functioning normally. Blinks Green Shooting photo.
Osmo Mobile User Manual Blinking Pattern — — — Descriptions Solid Green The Osmo Mobile is functioning normally or firmware upgrade successful. Blinks Green The Osmo Mobile is initializing / Exiting sleep mode Slow Pulsing Green Standby Solid Yellow The trigger is being held down and the gimbal is in Lock Mode Blinks Yellow The gimbal is not functioning normally.
Osmo Mobile User Manual Operation Modes Upright Mode Upright Mode can be used without any user input. In this mode, quickly tap the trigger twice to center the mobile phone. Underslung Mode Holding the Osmo Mobile upside down will cause it to enter Underslung Mode, in which the mobile phone can easily capture images from a lower position. 12 © 2017 DJI All Rights Reserved.
Osmo Mobile User Manual Flashlight Mode Rotate the Osmo Mobile forward 90 degrees to go from Upright Mode to Flashlight Mode. In Flashlight Mode, pushing the joystick up and down will tilt the gimbal, pushing the joystick left and right will have no effect. Portrait Mode Rotate the Osmo Mobile 90 degrees to the left or right to go from Upright Mode to Portrait Mode. ActiveTrack is disabled when using Portrait Mode. © 2017 DJI All Rights Reserved.
DJI GO App Watch a live HD video feed on your mobile screen through the DJI GO app. The app also allows you to configure camera and gimbal settings in just a few taps. Download Search ‘DJI GO’ on the App Store or Google Play and download the app to your mobile device. Connecting to the DJI GO App DJI GO App 3. Lanuch DJI GO app. If you are using the Osmo Mobile for the first time, follow the onscreen instructions to activate it. You will need to log in to your DJI account through an Internet connection.
Osmo Mobile User Manual Key Pages 1. Equipment > Camera [1] [13] [12] [11] [2] [3] [10] [4] [9] [5] [8] [6] [7] [1] Connection Status Indicates the connecting status between DJI GO app and Osmo Mobile. [2] / Photo/Video Toggle Slide to switch between photo and video mode. [3] Photo/Video Settings : Photo Modes Single shot, 2s, 5s or 10s intervals, HDR. : Video Modes Normal: Normal video based on your camera settings. Slow Motion: Tap to start/stop slow motion video recording.
Osmo Mobile User Manual [7] : Metering Mode/ : ActiveTrack Tap to switch between Metering Mode and ActiveTrack. Metering Mode: Tap on your screen for auto focus and manual exposure adjustment. ActiveTrack: Mark an object on your screen to track it as it moves. Tap the Record button to start recording. To adjust framing of the subject being tracked, use the Joystick. Recording will stop if you place or answer a call.
Osmo Mobile User Manual [10] : Camera Preference Select the video resolution, flash status and enable on-screen composition grids. Enable Manual Adjustment for ISO, Shutter Speed and White Balance control. Currently available on iOS only. [11] : Home Tap to navigate to the home screen. [12] Flash Status Displays the current status of the Flash. [13] Battery Level Displays the current battery level. Zoom Put two fingers on the screen and open to zoom in, close to zoom out.
Upgrading the Firmware Ensure that the battery has at least 50% power. It will take approximately 10 minutes to complete the upgrade. The camera status indicator will become solid green when the firmware upgrade is successful. How to Upgrade Connect the Osmo Mobile to your mobile device and then launch the DJI GO app. You will be reminded if a new firmware upgrade is available. To start upgrading, connect your mobile device to the internet and follow the on-screen instructions.
Osmo Mobile User Manual Notes The Zenmuse M1's operations and functions are the same as the Osmo Mobile, except other Osmo accessories such as Osmo Pro/RAW Z-Axis and Gimbal Extension can be used with the Osmo Handle. Pay attention to the following items when using the Zenmuse M1 gimbal with the Osmo Handle. The External Microphone Input cannot be used as a charging port for the Osmo Handle. Charge the battery using the provided charger.
Specifications Handle Dimensions 2.4×1.9×6.4 inch (61.8×48.2×161.5 mm) Weight (battery included) 201 g Gimbal Name Zenmuse M1 Model ZM01 Dimensions 4.92×4.29×3.57 inch (Folded) (125.06×109.15×90.98 mm) Weight 300 g Consumption 2.5 W Angular Vibration Range ±0.03° Controllable Range Pan: ±150° ; Roll: ±25° ; Tilt: -125° to +35° Mechanical Range Pan: ±165° ; Roll: -50° to +90° ; Tilt: -140° to +50° Max Controllable Speed 120°/s Mobile Phone Width Range 2.31-3.34 inch (58.6-84.
This content is subject to change. Download the latest version from www.dji.com/product/osmo-mobile If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. OSMO is a trademark of DJI. Copyright © 2017 DJI All Rights Reserved.
