User Manual V1.0 2016.
Searching for Keywords Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search. Navigating to a Topic View a complete list of topics in the table of contents. Click on a topic to navigate to that section. Printing this Document This document supports high resolution printing.
Contents Using this Manual 2 Legend 2 Install the DJI GO App 2 Introduction 4 Getting Started 5 Intelligent Battery 5 Mounting your Mobile Device 7 Removing the Mobile Device Holder 8 Optional Accessories 8 Unlocking the Gimbal Locking the Gimbal 9 10 Using the Osmo+ 10 Controls and Operations 10 Operation Modes 13 DJI GO App 15 Download 15 Connecting to the DJI GO App 15 Key Pages 16 Upgrading the Firm
Introduction The OSMOTM+ is a professional handheld gimbal camera that combines mobility and stability in one device. Its camera features an optical zoom lens providing 3.5x optical zoom and 2x lossless digital zoom*. It shoots sharp 12MP still photos and stable video at up to 4K. A light and ergonomic design places buttons at your fingertips, forming a powerful and personal one-handed filmmaking device. The DJI GO app complements the Osmo+ with shooting modes such as motion timelapse and 9-shot panorama.
Getting Started Intelligent Battery The 1225 mAh Intelligent Battery can power the Osmo+ for about 114 minutes. Charging the Battery Connect the battery charger to a power outlet using the provided cable. Place the battery into the battery charger. It will take approximately 110 minutes for the battery to be fully charged, refer to the "Status LED Indicator Descriptions" section below for more information about the Status LED Indicator's blinking patterns.
OSMO+ User Manual Battery Specifications Model HB02-542465 Type LiPo Capacity 1225 mAh Energy 14.1 Wh Voltage 11.1 V Charging Temperature 41° to 104° F (5° to 40° C) Operating Temperature 32° to 104° F (0° to 40° C) Be sure to fully charge the Intelligent Battery for the first time to activate it. Read the user manual, Intelligent Battery Safety Guidelines before use. The user takes full responsibility for all operations and usage.
OSMO+ User Manual Mounting your Mobile Device 1. Unfold the two arms on the mobile device holder. 2. Adjust the pads to the desired position. 3. Place one end of your mobile device into the arms. 4. Extend the arms so that your entire mobile device is seated in the mobile device holder. 5. Rotate your mobile device to the desired position. © 2016 DJI All Rights Reserved.
OSMO+ User Manual Removing the Mobile Device Holder 1. The mobile device holder can be removed by rotating the knob counterclockwise. 2. It is recommended to install the cap for the DJI Rosette Mount when it is not in use. Optional Accessories DJI provides various optional accessories for the Osmo+. Z-Axis The Osmo Z-Axis can significantly reduce vertical shaking from natural arm movements when walking and jogging. Universal Mount Used to mount external devices such as a microphone or flashlight.
OSMO+ User Manual Vehicle Mount Triple suction cup mount makes it ideal for mounting on top of or on the rear window of moving vehicles. Straight Extension Arm Used to attach up to three other mounts at the same time. Visit the official DJI Store (http://store.dji.com) to learn more. Unlocking the Gimbal To protect the gimbal, the motor axes are locked in place. To unlock the gimbal: 1. Gently rotate the roll motor until it can rotate freely. Rotate the motor just enough to allow free motion. 2.
OSMO+ User Manual You can choose to unlock the gimbal before or after the Osmo+ is turned on. It is recommended to unlock the gimbal before powering on the Osmo+. The Osmo+ will beep slowly if the gimbal is locked after it is turned on. This means the camera is working normally but the gimbal is shut off. If you need to unlock the gimbal after it is turned on, you must rotate the pan motor to reactivate the gimbal.
OSMO+ User Manual [2] Joystick Vertical movement tilts the camera. Horizontal movement pans the camera. Joystick Control Direction can be changed in the DJI GO app. [3] Shutter Button Press this button to take photos based on your settings in the DJI GO app. Hold down shutter button to capture continuous photo. [4] Record Button Press this button once to start recording video, and again to stop recording.
OSMO+ User Manual [6] System Status Indicator Indicates the status of the Osmo+. Refer to the table below for details. System Status Indicator System Status Indicator Description Blinks Green quickly The Osmo+ is initializing / Exiting sleep mode. Blinks Red slowly Low battery level warning. Blinks Red quickly Critical low battery level warning. — Solid Yellow — Solid Red Breathing Green (high battery level) Breathing Red (low battery level) The trigger is tapped and the gimbal is in lock mode.
OSMO+ User Manual The external microphone will override audio reception of the built-in microphone. [10] Key Combination Restore Default Wi-Fi Settings: Hold down the Trigger and Shutter Button at the same time. Then, pull the power switch down until the System Status Indicator blinks green. Release the power button before releasing the Trigger. The default SSID, password and frequency for the Wi-Fi connection will be restored.
OSMO+ User Manual Underslung Mode Holding the Osmo+ upside down will cause it to enter Underslung Mode, in which the camera can easily capture images from a lower position. Quickly tapping the trigger twice will center the camera. Flashlight Mode Rotate the Osmo+ forward 90 degrees to go from Upright Mode to Flashlight Mode. In Flashlight Mode, pushing the joystick up and down will tilt the camera, pushing the joystick left and right will have no effect. 14 © 2016 DJI All Rights Reserved.
OSMO+ User Manual Portrait Mode Rotate the Osmo+ 90 degrees to the left or right to go from Upright Mode to Portrait Mode. DJI GO App Watch a live HD video feed on your mobile screen through the DJI GO app. The Osmo+ is complemented by the DJI GO app, which provides shooting modes such as motion timelapse and 9-shot panorama. The app also allows you to configure camera and gimbal settings in just a few taps.
OSMO+ User Manual 2. On your mobile device, connect to the ‘OSMO_XXXXXX’ Wi-Fi network and enter the default password 12341234. Then launch the DJI GO app. Wi-Fi Settings Enable Wi- Fi Wi-Fi i OSMO_XXXXXX CHOOSE A NETWORK... i Other... i Ask to Join Networks... Known networks will be joined automatically. If no known networks are available, you will have to manually select a network. 3. If you are using the Osmo+ for the first time, follow the on-screen instructions to activate it.
OSMO+ User Manual [1] ISO:100 1/25 f:2.8 EV:0 JPEG 453 89% AE Information Bar Displays the camera parameters, current battery level, and Wi-Fi signal strength. [2] / : Auto Focus / Metering Mode Tap to switch between Auto Focus and Metering Mode. [3] / : Photo/Video Toggle Slide to switch between photo and video mode. [4] Photo/Video Settings : Photo Modes Single Shot Normal, 5s or 10s delayed shot, HDR.
OSMO+ User Manual [5] [6] : Shutter/Record Button Shoots photos in photo mode and records video in video mode. : Camera Parameters Choose the shooting mode, ISO, shutter speed and exposure value. [7] : Playback Tap to view photos and videos on the Micro SD card. [8] : Zoom Button Tap T to zoom in and W to zoom out. [9] 00:00:00 | 01:25:45 : Recording Status Bar Displays the current recording time, remaining recording time and microphone volume.
OSMO+ User Manual Deadband: A larger deadband requires more pan/tilt handle movement to translate into gimbal motion. Acceleration: Determines how closely the camera will follow the translated pan/tilt handle movement. • Joystick Settings Smoothing: Controls the deceleration of the gimbal. A small value will cause the gimbal to stop abruptly. Speed: Controls the movement speed of the tilt and pan axes when controlled by the joystick.
OSMO+ User Manual adjust according to the level of zoom. Focus when Gimbal stops: Enable this function to allow auto focus after the gimbal has stopped moving. Set Gimbal Attitude: Set gimbal tilt and pan angle manually. [12] : Camera Quick Settings A shortcut for changing the video resolution, photo format and photo color; select a predefined or custom white balance; choose style settings for adjusting sharpness, saturation and contrast. Adjust the microphone volume under Audio Volume Control.
Upgrading the Firmware Ensure that the battery has at least 50% power. It will take approximately 20 minutes to complete the upgrade. It is recommended to lock the gimbal and place the handle on a flat surface during the upgrade process. The camera status indicator will blink green and red alternately during the upgrade process, and become solid green when the firmware upgrade is complete.
Maintenance When transporting the Osmo+, keep it locked, in order to protect the gimbal, as shown below. The Osmo+ is not water resistant. Keep it away from sand and dust during use. After use, it is recommended to wipe the Osmo+ down with a soft dry cloth. Never spray any cleaning liquids onto the Osmo+. Specifications Handle Dimensions 2.4×1.9×6.4 inches (61.8×48.2×161.
OSMO+ User Manual Camera Model X3 ZOOM / FC350Z 1/2.3” CMOS Sensor Effective pixels:12.40 M (Total pixels: 12.76 M) 3.5× Optical Zoom 22 - 77mm Equivalent Lens F2.8 (Wide) - F5.2 (Tele) FOV 92° (Wide)- 35° (Tele) Focus: 0.5 m to infinity ISO Range 100 - 3200 (video); 100 - 1600 (photo) Electronic Shutter Speed 8 s - 1/8000 s (up to 30 s when camera is in M mode) Max. Image Size 4000×3000 pixels Single Shot Photo Burst Mode: 3/5/7 shots Auto Exposure Bracketing (AEB): 3/5 bracketed frames @ 0.
OSMO+ User Manual Audio Output 48 kHz AAC Wi-Fi Video Link Operating Frequency Max Transmission Distance Transmitter Power (EIRP) 2.412 – 2.462 GHz 5.180 – 5.805 GHz 82 feet (25 m) 2.4 GHz: 8 dBm 5 GHz: 12 dBm Intelligent Battery Model HB02-542465 Type LiPo Capacity 1225 mAh Energy 14.1 Wh Voltage 11.55 V Charging Temperature 41° to 104° F (5° to 40° C) Operating Temperature 32° to 104° F (0° to 40° C) Battery Charger Model OS1C11 Input 100 – 240 V, 50/60 Hz Output 12.6/13.2 V, 0.
Troubleshooting 1. Why can’t I connect to the Osmo+? • Check your mobile device’s Wi-Fi settings to make sure it is connected to the Osmo+’s Wi-Fi network. • If the Osmo+’s Wi-Fi network does not appear in your phone’s Wi-Fi settings, make sure your mobile device is operating at either the 2.4GHz or 5.8GHz channel and try again. • If you still cannot connect to the Osmo+ even though your mobile device is connected to the Osmo+’s Wi-Fi network, restart the Osmo+ and try again.
This content is subject to change. Download the latest version from http://www.dji.com/product/osmo-plus If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. OSMOTM is a trademark of DJI. Copyright © 2016 DJI All Rights Reserved.