Manual

DJI Osmo Pocket 3
User Manual
©
2023 DJI All Rights Reserved.
27
DJI Mic 2 Transmitter Status LEDs
1
2
DJI Mic 2 Transmitter Connection
Follow the steps below to connect to DJI Mic 2 (hereinafter referred to as “transmitter”).
1. Swipe down from the top of the screen and enter the control menu. Tap the settings icon
and select Wireless Mic > TX1/TX2, and the camera is ready to link with a transmitter.
2. Press and hold the power button of the transmitter for two seconds to power on.
1
Recording Status LED
Blinking Pattern Descriptions
— Solid red The transmitter is recording independently.
O The transmitter is not recording independently.
2
System Status LED
Blinking Pattern Descriptions
Blinks green slowly Reserved Status
— Solid blue Linked via Bluetooth
Blinks blue slowly Ready to link via Bluetooth
Blinks blue quickly Linking
— Solid yellow Noise Cancelling is enabled when the transmitter
is linked to the Bluetooth device.
Blinks yellow Noise Cancelling is enabled when the transmitter
is not linked to the Bluetooth device.
Battery Level Descriptions
— Solid red 0-10%
Blinks green slowly
0-25%
Blinks green twice
26-50%
Blinks green three times
51-75%
Blinks green four times
76-99%
O
Fully charged