Manual

DJI Osmo Pocket 3
User Manual
©
2023 DJI All Rights Reserved.
33
9.
Shooting Modes:
tap to change the shooting mode.
10.
Playback:
tap to preview and manage the shot footage on both the gimbal camera and the
mobile device.
11.
Screen Mirroring:
tap to mirror the camera view.
12.
Virtual Joystick:
move the virtual joystick left and right to rotate the camera in the pan
axis; move up and down to control camera tilt.
13.
Zoom:
displays the current zoom ratio. Place two ngers on the screen and move them
apart to zoom in or pinch together to zoom out.
14.
Settings:
choose Basic or PRO mode for the selected shooting mode and set related
parameters. More settings become available once PRO is enabled, such as FOV, Exposure,
and White Balance. Dierent shooting modes have dierent settings and parameters.
15.
Glamour Eects:
tap to enable or disable Glamour Eects and adjust related parameters.
16.
Parameters Settings:
tap to set the parameters for each shooting mode, such as video
resolution and frame rate.
17.
Shooting Parameters:
when in PRO mode, tap to set parameters such as EV, Shutter, and
ISO.
Maintenance
Firmware Update
Use DJI Mimo to update the rmware of the device.
Ensure the battery level is above 15% before updating the rmware. Connect the device to DJI
Mimo. If new rmware is available, DJI Mimo will display a prompt. Tap the prompt and follow
the on-screen instructions to update the rmware. The update takes approximately 2 minutes.
Storing
Osmo Pocket 3 can be stored in the Osmo Pocket 3 Protective Cover or the Osmo Pocket 3
Carrying Bag.
Using the Osmo Pocket 3 Protective Cover
Power o the handheld gimbal camera. Store it in the protective cover with the touchscreen
facing downward as shown in the illustration. It is unnecessary to detach the handle. The
protective cover has dedicated storing locations for the Osmo Pocket 3 Black Mist Filter (A), the
Osmo Pocket 3 Wide-Angle Lens (B), and the DJI Mic 2 Transmitter (C).