Manual

DJI Osmo Pocket 3

User Manual

When detaching, press and hold the release

button on the battery handle and unplug

the handle. After the battery handle is

detached, press the release button once to

check the battery level using the status LED.

Status LED Battery Level

Solid red for 3 s and turns o 0% - 19%

Solid yellow for 3 s and turns o 20% - 49%

Solid green for 3 s and turns o 50% - 100%

Blinks green Charging

O Fully Charged

• Make sure the battery handle has power when used with external audio devices.

• Make sure the battery handle is properly insulated to prevent re hazards. DO NOT

drop or strike the battery handle.

• It is recommended to use the DJI 65W Portable Charger or DJI 30W USB-C Charger (not

included) to charge the battery handle.

950 mAh

×1

3. Make sure the battery handle is rmly attached and the clips on the two sides are locked into

place. Once mounted, the power level of the battery handle can be checked on the rotatable

touchscreen. The USB-C port on the rear of the battery handle can be used for charging or

connecting external audio devices such as wired digital headphones, wired microphones, or the

wireless microphone receiver.