User Manual

OSMO POCKET User Manual
©
2018 DJI OSMO All Rights Reserved.
5
OR
Activating Osmo Pocket
When using Osmo Pocket for the rst time, activation is required through DJI Mimo. Follow the
steps below to activate.
1. Remove the cover on the universal port and choose a lightning or USB-C smartphone adapter
to connect to Osmo Pocket.
2. Press and hold the Power/Function Button to power on.
3. Launch DJI Mimo and follow the on-screen instructions to activate Osmo Pocket.
DO NOT touch the gimbal when it is powering on. Otherwise, it may aect the performance.
Charging Osmo Pocket
To charge Osmo Pocket, connect a USB adapter (not included) to the USB-C port using the
provided power cable. The battery is fully charged when the status LED turns o.
The battery level is displayed on the touch screen after powering on Osmo Pocket.
Charging time: approx. 1 hour 13 minutes (when using a USB adapter of 5 V/2 A).
The status LED indicates the battery level during charging. Refer to the table below for details.
Blinking Pattern Battery Level
Blinks green 0-24%
Blinks green twice 25%-49%
Blinks green three times 50%-74%
Blinks green four times 75%-99%
Glows solid green for six seconds and turns o 100%