User Manual

OSMO POCKET User Manual
©
2018 DJI OSMO All Rights Reserved.
9
When there is a microSD card inserted in Osmo Pocket, photos and videos automatically store to the
microSD card rather than the mobile device.
Blinking Pattern Description
Blinks red three times quickly
Battery level is low and device is about to
power o
Blinds red and green alternatively Updating rmware
Solid red Temperature is too high
Blinks red slowly Recording video
Blinks yellow No serial number
Solid yellow Device not activated
Solid green Working normally with microSD card inserted
Blinks green “X” times (“X” is the time of the
countdown)
Interval countdown
ActiveTrack is disabled in FPV mode and Video mode with 4K 60fps resolution.
When connected to DJI Mimo, the touch screen turns o and cannot be used.
Status LED Descriptions
The status LED indicates dierent statuses on Osmo Pocket. Refer to the table below for details.
Storing Photos and Videos
The footage shot on Osmo Pocket can be stored on a mobile device and a microSD card (not
provided). If there is no microSD card inserted, only low bitrate video can be stored on a mobile
device. Photo, Pano, and Timelapse will be unavailable. A UHS-I Speed Grade 3 rating microSD
card is required due to the fast read and write speeds necessary for high-resolution video data.
Insert the microSD card into the microSD card slot as shown.