Getting Started Guide

back to the previous menu.
Button Functions
Power Button
Press and hold to power on or off.
Tap or press twice to enter or exit sleep mode.
Trigger
Tap once to start ActiveTrack (requires the Image Transmission System to be enabled).
Press and hold to enter Lock mode.
Tap twice to re-center the gimbal.
Tap three times to turn the gimbal 180° so that the camera faces you (selfie mode).
Camera Control Button*
Press halfway for autofocus.
Press once to start or stop recording.
Press and hold to take a photo.
M Button
Tap to select a user profile.
Press and hold to enter Sport mode.
Press and hold and press the trigger twice to remain in Sport mode. Repeat to exit Sport mode.
Quickly tap twice to enter portrait mode.
Press three times to enter or exit 3D Roll 360. When in 3D Roll 360, move the joystick left or right
twice to automatically rotate the camera. Tap the trigger twice to stop continuous auto rotation.
Press and hold the M button together with the trigger to begin auto tune.
Front Dial*
Turn to control focus (default setting).
Joystick
Push up or down to control the movement of the tilt axis (default setting). Push left or right to
control the movement of the pan axis (default setting).
*The functions of the camera control button and front dial vary according to the camera and
require the camera control cable to be connected. Refer to the DJI RSC 2 Camera Compatibility List
on www.dji.com/rsc-2 for more information.
Ronin App
Use the Ronin app to access more functions such as Force Mobile, virtual joystick, and gimbal and
camera settings.