User manual

Semi-automatic descent: All stick commands are available except the throttle stick command during

the descent and landing process. Motors will stop automatically after landing. Users will regain control

once the motors have stopped. There is no need to toggle the S1 switch.

(1) When flying in the airspace (A/B/C) of restricted special area, LED flight indicators will blink red

quickly and continue for 3 seconds, then switch to indicate current flying

status and continue for 5 seconds at which point it will switch back to red blinking.

(2) For safety reasons, please do not fly close to airports, highways, railway stations, railway lines,

city centers and other special areas. Try to ensure the aircraft is visible.

6.8 Conditions of Flight Limits

In different working modes and flight modes, flight limits will differ according to number of GPS satellites found.

The following table demonstrates all the cases(√: available; ×:unavailable).

All flights are restricted by height, distance and special areas simultaneously.

Phantom mode

Flight Status

Limits of Special Area

Max Height

Max Radius

Ready to Fly

√

Ready to Fly (non-GPS)

√

Naza-M mode

Control Mode

number of GPS found

Limits of Special Area

Max Height

Max Radius

GPS

≥6

√

＜6

√

ATTI.

≥6

√

＜6

√

Manual

≥6

＜6

Disclaimer

Please ensure that you are kept up to date with International and Domestic airspace rules and regulations before

using this product. By using this product, you hereby agree to this disclaimer and signify that you have read this fully.

You agree that you are responsible for your own conduct and content while using this product, and for any direct or

indirect consequences caused by not following this manual, violate or disregard any other applicable local laws,

administrative rules and social habits thereof.