PHANTOM 3 ADVANCED User Manual 2015.04 V1.
Using this manual Legends Warning Important Hints and Tips Reference Read Before the First Flight Read the following documents before using the Phantom 3 Advanced: 1. In the Box 2. Phantom 3 Advanced User Manual 3. Phantom 3 Advanced Quick Start Guide 4. Phantom 3 Professional / Advanced Safety Guidelines and Disclaimer 5.
Contents Using this manual Legends 2 Read Before the First Flight 2 Video Tutorials 2 Download the DJI Pilot app 2 Product Profile Introduction 6 Feature Highlights 6 Preparing the Aircraft 7 Aircraft Diagram 8 Remote Controller Diagram 8 Aircraft Flight Controller 11 Flight Mode 11 Flight Status Indicator 11 Return-to-Home (RTH) 12 Smart RTH 12 Low Battery RTH 13 Failsafe RTH 14 Vision Positioning System 14
Camera and Gimbal Camera Profile 31 Gimbal 32 DJI Pilot App Camera 35 Director 38 Store 38 Discovery 38 Flight Flight Environment Requirements 40 Flight Limits and No-Fly Zones 40 Preflight Checklist 44 Calibrating the Compass 44 Auto Takeoff and Auto Landing 45 Flight Test 46 Starting/Stopping the Motors 46 Troubleshooting (FAQ) Appendix 4 Specifications 53 Intelligent Orientation Control (IOC) 55 FCC Compliance 56 © 201
Product Profile This section introduces the Phantom 3 Advanced and lists the components of the aircraft and remote controller. © 2015 DJI. All Rights Reserved.
Product Profile Introduction The Phantom 3 Advanced represents the next generation of DJI quadcopters. It is capable of capturing 1080p video and transmitting an HD video signal out of the box. The built-in camera has an integrated gimbal to maximize stability while minimizing both weight and size. Even when no GPS signal is available, the Vision Positioning System allows the aircraft to hover accurately in place.
Phantom 3 Advanced User Manual Preparing the Aircraft Removing Gimbal Clamp Remove the gimbal clamp by sliding it to the right (when facing the nose of the aircraft), as shown below. Mount the propellers with black dots on to motors with black axes and spin counter-clockwise to secure. Mount the propellers with sliver dots on to motors with sliver axes and spin clockwise to secure. Be sure all propellers are securely in place.
Phantom 3 Advanced User Manual Aircraft Diagram [1] [2] [3] [4] [7] [6] [5] [1] GPS [2] Propeller [3] Motor [4] Front LED Indicator Product Profile [5] Landing gear [8] [9] [10] [11] [6] Gimbal and Camera [7] Aircraft Micro-USB Port [8] Aircraft Status Indicator [9] Intelligent Flight Battery [10] Vision Positioning Sensors [11] Antennas [12] [12] Camera Micro-SD Card Slot [13] Camera Micro-USB Port 4K [14] Link Button [14] [13] Remote Controller Diagram [1] Antennas [1] [2] Relays aircraft c
Phantom 3 Advanced User Manual [5] Battery Level LEDs Displays the battery level of the remote controller. [6] Status LED Displays the remote controller's system status. [7] Power Button Used to turn the remote controller on and off. [8] RTH LED [15] Product Profile Circular LED around the RTH button displays RTH status. [16] [9] Camera Settings Dial Turn the dial to adjust camera settings. (Only functions when the remote controller is connected to a mobile device running the DJI Pilot app.
Aircraft This section introduces the features of the Flight Controller, Vision Positioning System, and the Intelligent Flight Battery 10 © 2015 DJI. All Rights Reserved.
Aircraft Flight Controller The Phantom 3 Advanced’s flight controller features several important upgrades, including a new flight mode. Safety modes include Failsafe and Return-to-Home. These features ensure the safe return of your aircraft if the control signal is lost. The flight controller can also save critical flight data from each flight to the on-board storage device. The new flight controller also provides increased stability and a new air braking feature.
Phantom 3 Advanced User Manual Aircraft Status Indicator Description Normal Alternatively Red, Green and Yellow Flash Green and Yellow Flash Alternatively Warming Up Safe to Fly (P-mode with GPS and Vision Positioning) Green Flashes Slowly Aircraft X2 Turning On and Self Diagnostic Testing Safe to Fly (P-mode with Vision Positioning but without GPS) Green Flashes Twice Safe to Fly (A-mode but No GPS and Vision Positioning) Yellow Flashes Slowly Warning Fast Yellow Flashing Remote Controller's S
Phantom 3 Advanced User Manual Low Battery RTH The low battery level failsafe is triggered when the DJI Intelligent Flight Battery is depleted to a point that may affect the safe return of the aircraft. Users are advised to return home or land the aircraft immediately when prompted. The DJI Pilot app will display a notice when a low battery warning is triggered. The aircraft will automatically return to the Home Point if no action is taken after a ten-second countdown.
Phantom 3 Advanced User Manual When the Critical battery level warning is triggered and the aircraft begins to land automatically, you may push the throttle upward to make the aircraft hover at its current altitude, giving you an opportunity to navigate to a more appropriate landing location. The colored zones and markers on the battery level indicator bar reflect the estimated remaining flight time. They are automatically adjusted according to the aircraft’s current location and status.
Phantom 3 Advanced User Manual Using Vision Positioning Vision Positioning is activated automatically when the Phantom 3 Advanced is turned on. No further action is required. Vision Positioning is typically used in indoor environments, where GPS is unavailable. Using the sensors that are built into the Vision Positioning system, the Phantom 3 Professional can hover precisely even without GPS. Aircraft Follow the steps below to use Vision Positioning: 1. Toggle the flight mode switch to P-mode. 2.
Phantom 3 Advanced User Manual Keep animals away from the aircraft when Vision Positioning system is activated. The sonar sensor emits high frequency sounds that are only audible to some animals. Flight Recorder Flight data is automatically recorded to the internal storage of the aircraft. This includes flight telemetry, aircraft status information, and other parameters. To access these data, connect the aircraft to the PC through the Micro-USB port and launch the DJI Pilot app.
Phantom 3 Advanced User Manual Ensure propellers are attached to its corresponding motors, otherwise the aircraft cannot take off. Wear gloves when handling propellers. Hand tighten each of the propellers on the corresponding motors to ensure it is attached firmly. Detaching the Propellers Hold the motor in place with one hand, then spin the propeller in the indicated unlock direction. DJI Intelligent Flight Battery The DJI Intelligent Flight Battery has a capacity of 4480 mAh, a voltage of 15.
Phantom 3 Advanced User Manual 10. Battery Cell Damage Protection: The DJI Pilot app displays a warning message when a damaged battery cell is detected. 11. Battery Error History: Browse the battery error history in the DJI Pilot app. 12. Sleep mode: To save power, the battery enters sleep mode after 20 minutes of inactivity. 13. Communication: Information pertaining to the battery’s voltage, capacity, current, etc. is transmitted to the aircraft’s main controller.
Phantom 3 Advanced User Manual The Battery Level Indicators will also show the current battery level during charging and discharging. The indicators are defined below. : LED is on. : LED is off. : LED is flashing. Battery Level LED1 LED2 LED3 LED4 Battery Level 87.5%~100% 75%~87.5% Aircraft 62.5%~75% 50%~62.5% 37.5%~50% 25%~37.5% 12.5%~25% 0%~12.5% =0% Battery life Battery life refers to how many more times the battery can be discharged and recharged before it must be replaced.
Phantom 3 Advanced User Manual Charging the Intelligent Flight Battery 1. Connect the Battery Charger to a power source (100-240 V 50/60 Hz). 2. Open the Protection Cap and connect the Intelligent Flight Battery to the Battery Charger. If the battery level is above 95%, turn on the battery before charging. 3. The Battery Level Indicator will display the current battery level as it is charging. 4. The Intelligent Flight Battery is fully charged when the Battery Level Indicators are all off. 5.
Phantom 3 Advanced User Manual After these issues are resolved, press the Power Button to turn off the Battery Level Indicator. Unplug the Intelligent Flight Battery from the charger and plug it back in to resume charging. Note that you do not need to unplug and plug in the charger in the event of a room temperature error; the charger will resume charging when the temperature is within the allowable range. DJI does not take any responsibility for damage caused by third-party chargers. © 2015 DJI.
Remote Controller This section describes the features of the remote controller and includes instructions for controlling the aircraft and the camera. 22 © 2015 DJI. All Rights Reserved.
Remote Controller Remote Controller Profile The Phantom 3 Advanced remote controller is a multi-function wireless communication device that integrates the video downlink system and aircraft remote control system. The video downlink and aircraft remote control system operate at 2.4 GHz. The remote controller features a number of camera control functions, such as taking and previewing photos and videos, as well as controlling gimbal motion. The remote controller is powered by a 2S rechargeable battery.
Phantom 3 Advanced User Manual Power Outlet Charger Power Button Controlling the Camera Remote Controller Shoot videos/pictures, view recorded images, and adjust camera settings via the Shutter Button, Camera Settings Dial, Playback Button, and Video Recording Button on the remote controller. [5] [4] [1] [2] [3] [1] Camera Settings Dial Turn the dial to adjust camera settings such as ISO, shutter speed, and aperture without letting go of the remote controller.
Phantom 3 Advanced User Manual Stick Neutral/Mid-Point: Control sticks are in the center position. Moving the Control Stick: The control stick is pushed away from the center position. Remote Controller (Mode 2) Aircraft ( Indicates Nose Direction) Remarks Moving the left stick to the left or right controls the rudder and rotation of the aircraft. Push the sick left to rotate the aircraft counterclockwise, push the stick right to rotate the aircraft clockwise.
Phantom 3 Advanced User Manual Flight Mode Switch Toggle the switch to select the desired flight mode. You may choose between; P-mode, F-mode and Amode. Position Figure Position 1 Flight Mode Position 1 F-mode Position 2 A-mode Position 3 P-mode Position 2 Position 3 Remote Controller P-mode (Positioning): P-mode works best when the GPS signal is strong.
Phantom 3 Advanced User Manual Connecting Your Mobile Device Tilt the mobile device holder to the desired position. Press the button on the side of the mobile device holder to release the clamp, and then place your mobile device into the cradle. Adjust the clamp down to secure the mobile device. To connect your mobile device to the remote controller using a USB cable, plug one end of the cable into your mobile device and the other end into the USB port on the back of the remote controller.
Phantom 3 Advanced User Manual Status LED Alarm Remote Controller Status — Solid Red Chime The remote controller is disconnected from the aircraft. — Solid Green Chime The remote controller is connected to the aircraft. Slow Blinking Red D-D-D...... Remote controller error. / Red and Green/ Red and Yellow Alternate Blinks None HD downlink is disrupted. RTH LED Sound Remote Controller Status — Solid White Chime Aircraft is returning home. Remote Controller Blinking White D...
Phantom 3 Advanced User Manual 4. The remote controller is ready to link. The Remote Controller Status Indicator blinks blue and a beep is emitted. RC Control Setting RC Calibration Stick Mode Searching for aircraft frequency, timeout in 54 seconds Default stick mode is Mode 2, changing stick modes alters the way the aircraft is controlled. Do not change unless familiar with your new mode.
Camera and Gimbal This section provides the technical specifications of the camera and explains the gimbal’s operation modes. 30 © 2015 DJI. All Rights Reserved.
Camera and Gimbal Camera Profile The on-board camera uses a 1/2.3 inch CMOS sensor to capture video (up to1080p at 60 frames per second with the Phantom 3 Advanced) and 12 megapixel stills. You may choose to record the video in either MOV or MP4 format. Available picture shooting modes include burst, continuous, and time-lapse mode. A live preview of what the camera sees can be monitored on the connected mobile device via the DJI Pilot app.
Phantom 3 Advanced User Manual Camera Operation Use the Shutter and Video Recording buttons on the remote controller to shoot the images or videos through the DJI Pilot app. For more information about how to use these buttons, refer to “Controlling the Camera Page 24”. Gimbal Gimbal Profile The 3-axis gimbal provides a steady platform for the attached camera, allowing you to capture clear, stable images and video. The gimbal can tilt the camera within a 120˚ range.
Phantom 3 Advanced User Manual Anti-Drop Kit The anti-drop kit helps keep the gimbal and camera connected to the aircraft. Two pins have been mounted prior to shipping. If new or additional pins are required, see the diagram below. Press Part ① through the hole of the vibration absorber and into the center hole of Part ② , then lock them together as shown ③ . Mounting the anti-drop kit pins diagonally from each other is recommended. ① ③ ② Gimbal Camera © 2015 DJI. All Rights Reserved.
DJI Pilot App This section introduces the four main functions of the DJI Pilot app. 34 © 2015 DJI. All Rights Reserved.
DJI Pilot App The DJI Pilot app is a mobile application designed specifically for the Phantom 3 Advanced. Use this app to control the gimbal, camera, and other aircraft functions. The app also features Map, Academy, and User Center, which are used for configuring your aircraft and sharing your photos and videos with others. It is recommended that you use a tablet for the best experience.
Phantom 3 Advanced User Manual [1] Flight Mode : The text next to this icon indicates the current flight mode. Tap to configure the MC (Main Controller) Settings. These settings allow you to modify flight limits and set the gain values. [2] GPS Signal Strength : This icon shows the current strength of GPS signals. Green bars indicate adequate GPS strength. [3] IOC Settings CL : This icon displays the IOC setting when the aircraft has entered F-mode.
Phantom 3 Advanced User Manual Record : Tap once to start recording video, then tap again to stop recording. You can also press the Video Recording Button on the remote controller, which has the same functionality.. Playback : Tap to enter the playback page. You can preview photos and videos as soon as they are captured. Camera Settings : Tap to set ISO, shutter and auto exposure values of the camera.
Phantom 3 Advanced User Manual [16] Livestream : Livestream icon indicates the current video feed is broadcasting live on YouTube. Be sure the mobile data service is available on the mobile device. [17] Back : Tap to return to the main GUI. Director Director is an automatic video editor built into the DJI Pilot app. After recording several video clips, simply tap “Director” from the app’s home screen.
Flight This section describes safe flight practices and flight restrictions. © 2015 DJI. All Rights Reserved.
Flight Once pre-flight preparation is complete, it is recommended that you use the flight simulator in the DJI Pilot app to hone your flight skills and practice flying safely. Ensure that all flights are carried out in an open area. Flight Environment Requirements Flight 1. Do not use the aircraft in severe weather conditions. These include wind speeds exceeding 10 m/s , snow, rain and fog. 2. Only fly in open areas.
Phantom 3 Advanced User Manual GPS Signal Strong Blinking Green Flight Limits DJI Pilot app Aircraft Status Indicator Maximum Flight Altitude Aircraft's altitude cannot exceed the specified value. Warning: Height limit reached. None. Max Radius Flight distance must be within the max radius. Warning: Distance limit reached. Rapid red flashing when close to the max radius limit.
Phantom 3 Advanced User Manual 1640 feet 66 feet 1 mile R1 R2 320 feet 1640 feet 66 feet 1 mile 320 feet R1 R2 Restricted Area Flight (1) Restricted Areas does not have flight altitude restrictions. (2) R miles around the designated restriction area is a Take-off Restricted area. Aircraft cannot take off within this zone. The value of R varies based on the definition of the restricted areas. (3) A “warning zone” has been set around the Restricted Area. When the aircraft approaches within 0.
Phantom 3 Advanced User Manual GPS Signal Strong Zone No-fly Zone Warning zone Free zone Aircraft Status Indicator Restriction DJI Pilot App Prompt Motors will not start. Warning: You are in a No-fly zone. Take off prohibited. If the aircraft enters the restricted area in A-mode, but is switched to P-mode, the aircraft will automatically descend, land, and stop its motors. Warning: You are in a no-fly zone. Automatic landing has begun.
Phantom 3 Advanced User Manual Preflight Checklist 1. 2. 3. 4. 5. 6. Remote controller, Intelligent Flight Battery, and mobile device are fully charged. Propellers are mounted correctly and firmly. Micro-SD card has been inserted, if necessary. Gimbal is functioning normally. Motors can start and are functioning normally. The DJI Pilot app is successfully connected to the aircraft. Calibrating the Compass IMPORTANT: Always calibrate the compass in every new flight location.
Phantom 3 Advanced User Manual 3. Hold the aircraft vertically, with nose pointing downward, and rotate it 360 degrees around the center axis. Recalibrate the compass if the Aircraft Status Indicator glows solid red. Flight If the Aircraft Status Indicator blinks red and yellow after the calibration procedure, move your aircraft to a different location and try again. Calibrate the compass before each flight. Launch the DJI Pilot app and follow the on-screen instructions to calibrate the compass.
Phantom 3 Advanced User Manual Auto-Landing Use auto-landing only if the Aircraft Status Indicators are blinking green. Follow the steps below to use the auto-landing feature: 1. Ensure the aircraft is in P- mode. 2. Check the landing area condition before tapping “ ”, to begin landing. Then follow the on-screen instructions. Starting/Stopping the Motors Starting the Motors A Combination Stick Command (CSC) is used to start the motors.
Phantom 3 Advanced User Manual When the Aircraft Status Indicators blink yellow rapidly during flight, the aircraft has entered Failsafe mode. A low battery level warning is indicated by the Aircraft Status Indicators blinking red slowly or rapidly during flight. Watch our video tutorials for more flight information. Video Suggestions and Tips 1. Go through the full pre-flight checklist before each flight. 2. Select the desired gimbal operation mode in the DJI Pilot app. 3.
FAQ 48 © 2015 DJI. All Rights Reserved.
Troubleshooting (FAQ) What is the difference between the Phantom 3 Professional and the Phantom 3 Advanced? The biggest difference between the Phantom 3 Professional and the Phantom 3 Advanced is in the camera. The Phantom 3 Professional is capable of shooting spectacular 4K video at up to 30 frames per second, and the Phantom 3 Advanced is capable of shooting at resolutions up to 1080p60. Both models shoot 12 megapixel photos. The other main difference is the Intelligent Flight Battery charger.
Phantom 3 Advanced User Manual How do I use the Director automatic video editor? Director is an automatic video editor built into the DJI Pilot app. After recording several video clips, simply tap “Director” from the app’s home screen. You can then select a template and a specified number of clips, which are automatically combined to create a short film that can be shared immediately. How do I change the control mode of my Phantom 3? By default, the Remote Controller is set to Mode 2.
Phantom 3 Advanced User Manual What is the Phantom 3 flight time? Flight times will vary depending on environmental conditions and usage patterns, but the Intelligent Flight Battery is designed to provide up to 23 minutes of uninterrupted flight time when fully charged. How can I restore a video file if the power is turned off during recording? Do not remove the Micro-SD card from the camera. If it has been removed, place it back in the camera.
Appendix 52 © 2015 DJI. All Rights Reserved.
Appendix Specifications Aircraft Weight (Battery & Propellers Included) 1280 g Max. Ascent Speed 5 m/s Max. Descent Speed 3 m/s Max. Speed 16 m/s (ATTI mode, no wind) Max. Flight Altitude 6000 m Max.
Phantom 3 Advanced User Manual Remote Controller Operating Frequency 2.400 GHz-2.483 GHz Transmitting Distance 2000 m (Outdoor And Unobstructed) Video Output Port USB Operating Temperature Range 0°C- 40°C Battery 6000 mAh LiPo 2S Mobile Device Holder Tablets and smartphones Transmitter Power(EIRP) FCC: 20 dbm; CE:16 dbm Working Voltage 1.2 A @7.4 V Charger Voltage 17.4 V Rated Power 57 W Intelligent Flight Battery ( PH3-4480 mAh-15.2 V ) Appendix Capacity 4480 mAh Voltage 15.
Phantom 3 Advanced User Manual Intelligent Orientation Control (IOC) IOC allows users to lock the control orientation of the aircraft in different modes. There are three working modes for IOC that can be selected in the DJI Pilot app. IOC only works when the aircraft is in F-mode, therefore the user must toggle the flight mode switch to activate IOC.
Phantom 3 Advanced User Manual FCC Compliance FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Phantom 3 Advanced User Manual susceptible d'en compromettre le fonctionnement. IC Radiation Exposure Statement: This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
The content is subject to change. Download the latest version from http://www.dji.com/product/phantom-3 If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. © 2015 DJI. All Rights Reserved.
