PHANTOM 3 PROFESSIONAL User Manual 2017.07 V1.
Searching for Keywords Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search. Navigating to a Topic View a complete list of topics in the table of contents. Click on a topic to navigate to that section.
Contents Using this manual 2 Legends 2 Read Before the First Flight 2 Video Tutorials 2 Download the DJI GO app 2 Product Profile 6 Introduction 6 Feature Highlights 6 Preparing the Aircraft 6 Aircraft Diagram 8 Remote Controller Diagram 8 Aircraft 11 Flight Controller 11 Flight Mode 11 Flight Status Indicator 11 Return-to-Home (RTH) 12 Smart RTH 13 Low Battery RTH 13 Failsafe RTH 14 Vision Positioning System 15 Flight Recorder 16 Attaching and Detaching the Propell
DJI GO app 35 Director 38 Store 38 Discovery 38 Flight 4 35 Camera 40 Flight Environment Requirements 40 Flight Limits and No-Fly Zones 40 Preflight Checklist 44 Calibrating the Compass 44 Auto Takeoff and Auto Landing 45 Flight Test 46 Starting/Stopping the Motors 46 Troubleshooting (FAQ) 49 Appendix 54 Specifications 54 Firmwares Update 56 Intelligent Flight Mode 56 After-Sales Information 56 FCC Compliance 57 © 2017 DJI All Rights Reserved.
Product Profile This section introduces the Phantom 3 Professional and lists the components of the aircraft and remote controller. © 2017 DJI All Rights Reserved.
Product Profile Introduction The Phantom 3 Professional represents the next generation of DJI quadcopters. It is capable of capturing 4K video and transmitting an HD video signal out of the box. The built-in camera has an integrated gimbal to maximize stability while minimizing both weight and size. Even when no GPS signal is available, the Vision Positioning System allows the aircraft to hover accurately in place.
Phantom 3 Professional User Manual Attaching the Propellers: Mount the propellers with black dots on to motors with black axes and spin counter-clockwise to secure. Mount the propellers with sliver dots on to motors with sliver axes and spin clockwise to secure. Be sure all propellers are securely in place. Product Profile Place all propellers onto the correct motors and tighten by hand to lock them in position.
Phantom 3 Professional User Manual Aircraft Diagram [1] [2] [3] [4] [8] [7] [6] [5] [1] GPS [2] Propeller [3] Motor [4] Front LED Indicator Product Profile [5] Landing gear [9] [10] [11] [6] Gimbal and Camera [7] Camera Status Indicator [8] Aircraft Micro USB Port [12] [9] Aircraft Status Indicator [10] Intelligent Flight Battery [11] Vision Positioning Sensors [13] [12] Antennas [13] Camera Micro SD Card Slot HD [14] Camera Micro USB Port [15] Link Button [15] [14] Remote Controller Diagram
Phantom 3 Professional User Manual [5] Battery Level LEDs Displays the battery level of the remote controller. [6] Status LED Displays the remote controller's system status. [7] Power Button Used to turn the remote controller on and off. [8] RTH LED [15] Product Profile Circular LED around the RTH button displays RTH status. [16] [9] Camera Settings Dial Turn the dial to adjust camera settings. (Only functions when the remote controller is connected to a mobile device running the DJI GO app.
Aircraft This section introduces the features of the Flight Controller, Vision Positioning System, and the Intelligent Flight Battery 10 © 2017 DJI All Rights Reserved.
Aircraft Flight Controller The Phantom 3 Professional’s flight controller features several important upgrades, including a new flight mode. Safety modes include Failsafe and Return-to-Home. These features ensure the safe return of your aircraft if the control signal is lost. The flight controller can also save critical flight data from each flight to the on-board storage device. The new flight controller also provides increased stability and a new air braking feature.
Phantom 3 Professional User Manual Aircraft Status Indicator Front LED Aircraft The Front LEDs show the orientation of the aircraft. The Front LEDs glow solid red when the aircraft is turned on to indicate the front (or nose) of the aircraft. The Aircraft Status Indicators communicate the system status of the flight controller.
Phantom 3 Professional User Manual Smart RTH Use the RTH button on the remote controller (refer to “RTH button” on page 26 for more information) or tap the RTH button in the DJI GO app and follow the on-screen instructions when GPS is available to initiate Smart RTH. The aircraft will then automatically return to the last recorded Home Point. You may use the remote controller’s control sticks to control the aircraft’s position to avoid a collision during the Smart RTH process.
Phantom 3 Professional User Manual When Critical battery level warning is triggered and the aircraft begins to land automatically, you may push the throttle upward to make the aircraft hover at its current altitude, giving you an opportunity to navigate to a more appropriate landing location. The colored zones and markers on the battery level indicator bar reflect the estimated remaining flight time. They are automatically adjusted according to the aircraft’s current location and status.
Phantom 3 Professional User Manual 20 m 20 m 20 m H If the aircraft is flying under 20 meters (65 feet) and Failsafe (including Smart RTH, Lower Battery RTH ) is triggered, the aircraft will first 20 m automatically ascend to 20 meters (65 feet) from the current altitude. H You can only cancel the ascending by exiting the Failsafe. Refer to “RTH Button” on page 26 for more information on how to exit the Failsafe and regain the control of the remote controller.
Phantom 3 Professional User Manual Follow the steps below to use Vision Positioning: 1. Toggle the flight mode switch to P-mode. 2. Place the aircraft on a flat surface. Note that the Vision Positioning system cannot work properly on surfaces without clear pattern variations. 3. Turn on the aircraft. The aircraft status indicator will flash green two times, which indicates the Vision Positioning system is ready. Gently push the throttle up to lift off and the aircraft will hover in place.
Phantom 3 Professional User Manual Attaching and Detaching the Propellers Use only DJI approved propellers with your Phantom 3 Professional. The grey and black nuts on the propeller indicate where they should be attached and in which direction whey should spin. To attach the propellers properly, match the nut color with the motor axis color. Propellers Silver Dot Black Dot Figure Attach On Motors with a black axes Lock : Turn the propellers in the indicated direction to mount and tighten.
Phantom 3 Professional User Manual DJI Intelligent Flight Battery The DJI Intelligent Flight Battery has a capacity of 4480 mAh, a voltage of 15.2 V, and a smart charge/ discharge functionality. It should only be charged using an appropriate charger that has been approved by DJI. Intelligent Flight Battery Charger Aircraft The Intelligent Flight Battery must be fully charged before using it for the first time. Refer to “Charging the Intelligent Flight Battery” for more information.
Phantom 3 Professional User Manual Turning ON/OFF Turning On: Press the Power Button once, then press again and hold for 2 seconds to turn on. The Power LED will turn red and the Battery Level Indicators will display the current battery level. Turning Off: Press the Power Button once, then press again and hold for 2 seconds to turn off. The battery power LED will flash when powering off the Phantom to allow automatically stopping of a recording during the event recording wasn’t stopped.
Phantom 3 Professional User Manual Battery life Battery life refers to how many more times the battery can be discharged and recharged before it must be replaced. When the battery is turned off, press and hold the Power Button for 5 seconds to check the battery life.
Phantom 3 Professional User Manual Battery Level Indicators While Charging LED1 LED2 LED3 LED4 Battery Level 0%~25% 25%~50% 50%~75% 75%~100% Fully Charged Aircraft Battery Protection LED Display The table below shows battery protection mechanisms and corresponding LED patterns.
Remote Controller This section describes the features of the remote controller and includes instructions for controlling the aircraft and the camera. 22 © 2017 DJI All Rights Reserved.
Remote Controller Remote Controller Profile The Phantom 3 Professional remote controller is a multi-function wireless communication device that integrates the video downlink system and aircraft remote control system. The video downlink and aircraft remote control system operate at 2.4 GHz. The remote controller features a number of camera control functions, such as taking and previewing photos and videos, as well as controlling gimbal motion. The remote controller is powered by a 2S rechargeable battery.
Phantom 3 Professional User Manual Power Outlet Charger Power Button Controlling the Camera Remote Controller Shoot videos/pictures, view recorded images, and adjust camera settings via the Shutter Button, Camera Settings Dial, Playback Button, and Video Recording Button on the remote controller. [5] [4] [1] [2] [3] [1] Camera Settings Dial Turn the dial to adjust camera settings such as ISO, shutter speed, and aperture without letting go of the remote controller.
Phantom 3 Professional User Manual Stick Neutral/Mid-Point: Control sticks are in the center position. Moving the Control Stick: The control stick is pushed away from the center position. Remote Controller (Mode 2) ( Aircraft Indicates Nose Direction) Remarks Moving the left stick to the left or right controls the rudder and rotation of the aircraft. Push the sick left to rotate the aircraft counterclockwise, push the stick right to rotate the aircraft clockwise.
Phantom 3 Professional User Manual Adjusting Controller Sticks Hold and twist the controller sticks clockwise or counter clockwise to adjust the length of the controller sticks. A proper length of controller sticks can improve the controlling accuracy. Flight Mode Switch Toggle the switch to select the desired flight mode. You may choose between; P-mode, F-mode and Amode.
Phantom 3 Professional User Manual Connecting Your Mobile Device Tilt the mobile device holder to the desired position. Press the button on the side of the mobile device holder to release the clamp, and then place your mobile device into the cradle. Adjust the clamp down to secure the mobile device. To connect your mobile device to the remote controller using a USB cable, plug one end of the cable into your mobile device and the other end into the USB port on the back of the remote controller.
Phantom 3 Professional User Manual Status LED Alarm Remote Controller Status — Solid Red Chime The remote controller is disconnected from the aircraft. — Solid Green Chime The remote controller is connected to the aircraft. Slow Blinking Red D-D-D...... Remote controller error. / Red and Green/ Red and Yellow Alternate Blinks None HD downlink is disrupted. RTH LED Sound Remote Controller Status — Solid White Chime Aircraft is returning home. Remote Controller Blinking White D...
Phantom 3 Professional User Manual 4. The remote controller is ready to link. The Remote Controller Status Indicator blinks blue and a beep is emitted. RC Control Setting RC Calibration Stick Mode Searching for aircraft frequency, timeout in 54 seconds Default stick mode is Mode 2, changing stick modes alters the way the aircraft is controlled. Do not change unless familiar with your new mode.
Camera and Gimbal This section provides the technical specifications of the camera and explains the gimbal’s operation modes. 30 © 2017 DJI All Rights Reserved.
Camera and Gimbal Camera Profile The on-board camera uses the 1/2.3 inch CMOS sensor to capture video (up to 4096x2160p at 24fps or 4K at up to 30fps with the Phantom 3 Professional) and 12 megapixel stills. You may choose to record the video in either MOV or MP4 format. Available picture shooting modes include burst, continuous, and time-lapse mode. A live preview of what the camera sees can be monitored on the connected mobile device via the DJI GO app.
Phantom 3 Professional User Manual Camera Operation Use the Shutter and Video Recording buttons on the remote controller to shoot the images or videos through the DJI GO app. For more information about how to use these buttons, refer to “Controlling the Camera Page 24”. Camera LED Indicator Camera LED Indicator lights up after the flight battery is powered on. It provides information on the working status of the camera. Camera LED Indicator Camera status Gimbal Camera Green Fast Blink (0.2s off, 0.
Phantom 3 Professional User Manual Gimbal Operation Modes Two gimbal operation modes are available. Switch between the different operation modes on the camera settings page of the DJI GO app. Note that your mobile device must be connected to the remote controller for changes to take effect. Refer to the table below for details: Follow Mode The angle between gimbal’s orientation and aircraft’s nose remains constant at all times.
DJI GO app This section introduces the four main functions of the DJI GO app. 34 © 2017 DJI All Rights Reserved.
DJI GO app The DJI GO app is a mobile application designed specifically for the Phantom 3 Professional. Use this app to control the gimbal, camera, and other aircraft functions. The app also features Map, Academy, and User Center, which are used for configuring your aircraft and sharing your photos and videos with others. It is recommended that you use a tablet for the best experience.
Phantom 3 Professional User Manual [1] Flight Mode : The text next to this icon indicates the current flight mode. Tap to configure the MC (Main Controller) Settings. These settings allow you to modify flight limits and set the gain values. The aircraft is set to “Beginner Mode” by default. The aircraft cannot fly 30 meters (98 feet) higher and beyond the recorded Home Point under beginner mode. Disable this mode in the MODE setting page.
Phantom 3 Professional User Manual Shutter : Tap this button to take a single photo. Press and hold this button to select single shot, triple shot or time-lapsed shooting modes. Record : Tap once to start recording video, then tap again to stop recording. You can also press the Video Recording Button on the remote controller, which has the same functionality. Playback : Tap to enter the playback page. You can preview photos and videos as soon as they are captured.
Phantom 3 Professional User Manual [16] Auto Takeoff/Landing / : Tap to initiate auto takeoff or landing. [17] Livestream : Livestream icon indicates the current video feed is broadcasting live on YouTube. Be sure the mobile data service is available on the mobile device. [18] Back : Tap to return to the main GUI. Director DJI GO App Director is an automatic video editor built into the DJI GO app. After recording several video clips, simply tap “Director” from the app’s home screen.
Flight This section describes safe flight practices and flight restrictions. © 2017 DJI All Rights Reserved.
Flight Once pre-flight preparation is complete, it is recommended that you use the flight simulator in the DJI GO app to hone your flight skills and practice flying safely. Ensure that all flights are carried out in an open area. Flight Environment Requirements Flight 1. Do not use the aircraft in severe weather conditions. These include wind speeds exceeding 10 m/s , snow, rain and fog. 2. Only fly in open areas.
Phantom 3 Professional User Manual GPS Signal Strong Blinking Green Flight Limits DJI GO app Aircraft Status Indicator Maximum Flight Altitude Aircraft's altitude cannot exceed the specified value. Warning: Height limit reached. None. Max Radius Flight distance must be within the max radius. Warning: Distance limit reached. Rapid red flashing when close to the max radius limit.
Phantom 3 Professional User Manual 1640 feet 66 feet 1 mile R1 R2 320 feet 1640 feet 66 feet 1 mile 320 feet R1 R2 Restricted Area Flight (1) Restricted Areas does not have flight altitude restrictions. (2) R miles around the designated restriction area is a Take-off Restricted area. Aircraft cannot take off within this zone. The value of R varies based on the definition of the restricted areas. (3) A “warning zone” has been set around the Restricted Area. When the aircraft approaches within 0.
Phantom 3 Professional User Manual GPS Signal Strong Zone No-fly Zone Warning zone Free zone Aircraft Status Indicator Restriction DJI GO app Prompt Motors will not start. Warning: You are in a No-fly zone. Take off prohibited. If the aircraft enters the restricted area in A-mode, but is switched to P-mode, the aircraft will automatically descend, land, and stop its motors. Warning: You are in a no-fly zone. Automatic landing has begun.
Phantom 3 Professional User Manual Preflight Checklist 1. 2. 3. 4. 5. 6. Remote controller, Intelligent Flight Battery, and mobile device are fully charged. Propellers are mounted correctly and firmly. Micro SD card has been inserted, if necessary. Gimbal is functioning normally. Motors can start and are functioning normally. The DJI GO app is successfully connected to the aircraft. Calibrating the Compass Only calibrate the compass when the DJI GO app or the status indicator prompt you to do so.
Phantom 3 Professional User Manual 3. Hold the aircraft vertically, with nose pointing downward, and rotate it 360 degrees around the center axis. Recalibrate the compass if the Aircraft Status Indicator glows solid red. Flight If the Aircraft Status Indicator blinks red and yellow after the calibration procedure, move your aircraft to a different location and try again. Launch the DJI GO app and follow the on-screen instructions to calibrate the compass.
Phantom 3 Professional User Manual Auto-Landing Use auto-landing only if the Aircraft Status Indicators are blinking green. Follow the steps below to use the auto-landing feature: 1. Ensure the aircraft is in P- mode. 2. Check the landing area condition before tapping “ instructions. ”, to begin landing. Then follow the on-screen Starting/Stopping the Motors Starting the Motors A Combination Stick Command (CSC) is used to start the motors.
Phantom 3 Professional User Manual When the Aircraft Status Indicators blink yellow rapidly during flight, the aircraft has entered Failsafe mode. A low battery level warning is indicated by the Aircraft Status Indicators blinking red slowly or rapidly during flight. Watch our video tutorials for more flight information. Video Suggestions and Tips 1. Go through the full pre-flight checklist before each flight. 2. Select the desired gimbal operation mode in the DJI GO app. 3.
FAQ 48 © 2017 DJI All Rights Reserved.
Troubleshooting (FAQ) What is the difference between the Phantom 3 Professional and the Phantom 3 Advanced? The biggest difference between the Phantom 3 Professional and the Phantom 3 Advanced is in the camera. The Phantom 3 Professional is capable of shooting spectacular 4K video at up to 30 frames per second, and the Phantom 3 Advanced is capable of shooting at resolutions up to 1080p60. Both models shoot 12 megapixel photos. The other main difference is the Intelligent Flight Battery charger.
Phantom 3 Professional User Manual How do I use the Director automatic video editor? Director is an automatic video editor built into the DJI GO app. After recording several video clips, simply tap “Director” from the app’s home screen. You can then select a template and a specified number of clips, which are automatically combined to create a short film that can be shared immediately. How do I change the control mode of my Phantom 3? By default, the Remote Controller is set to Mode 2.
Phantom 3 Professional User Manual What is the Phantom 3 flight time? Flight times will vary depending on environmental conditions and usage patterns, but the Intelligent Flight Battery is designed to provide up to 23 minutes of uninterrupted flight time when fully charged. How can I restore a video file if the power is turned off during recording? Do not remove the Micro SD card from the camera. If it has been removed, place it back in the camera.
Phantom 3 Professional User Manual Various factors contribute to the aircraft initialization error, try resolve the issue by following the suggestions listed below: • Sensor performance degraded. This may be due to the excessive bias detected from the IMU or the compass reading is interfered. Try restarting and calibrating the IMU and compass to resolve this issue. • Sensor is defective.
Appendix © 2017 DJI All Rights Reserved.
Appendix Specifications Aircraft Weight (Battery & Propellers Included) 1280 g Max. Ascent Speed 5 m/s Max. Descent Speed 3 m/s Max. Speed 16 m/s (ATTI mode, no wind) Max Service Ceiling Above Sea Level 6000 m (Software altitude limit: 120 m above takeoff point) Max.
Phantom 3 Professional User Manual Remote Controller Operating Frequency 2.400 GHz-2.483 GHz Up to 5.0 km or 3.1 miles (unobstructed, free of interferences and Transmitting Distance FCC compliant) when it is FCC compliant Up to 3.5 km or 2.
Phantom 3 Professional User Manual Firmwares Update Use Micro SD card to update the aircraft and Intelligent Flight Battery. Connect to the Internet, launch the DJI GO app. The DJI GO app will start checking for available firmware updates automatically. Follow the on-screen instruction to update the latest firmware for the aircraft, remote controller and intelligent flight battery.
Phantom 3 Professional User Manual FCC Compliance FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Phantom 3 Professional User Manual susceptible d'en compromettre le fonctionnement. IC Radiation Exposure Statement: This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
This content is subject to change. Download the latest version from http://www.dji.com/product/phantom-3 If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. PHANTOM is a trademark of DJI. Copyright © 2017 DJI All Rights Reserved.
