User Manual 2017.07 V1.
Searching for Keywords Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search. Navigating to a Topic View a complete list of topics in the table of contents. Click on a topic to navigate to that section. Printing this Document This document supports high resolution printing.
Contents Using this manual 2 Legends 2 Read Before the First Flight 2 Download the DJI GO App 2 Product Profile 6 Introduction 6 Feature Highlights 6 Preparing the Aircraft 6 Aircraft Diagram 8 Remote Controller Diagram 8 Aircraft 11 Flight Controller 11 Flight Mode 11 Flight Status Indicator 11 Return-to-Home (RTH) 12 Smart RTH 12 Low Battery RTH 13 Failsafe RTH 14 Vision Positioning System 15 Flight Recorder 16 Attaching and Detaching the Propellers 16 DJI Intelli
DJI GO App 34 Editor 36 SkyPixel 36 Me 36 Flight 38 Flight Environment Requirements 38 Flight Limits and No-Fly Zones 38 Preflight Checklist 40 Calibrating the Compass 40 Auto Takeoff and Auto Landing 41 Flight Test 42 Starting/Stopping the Motors 42 Appendix 4 34 Equipment 45 Specifications 45 Firmwares Update 47 Intelligent Flight Mode 47 After-Sales Information 47 © 2017 DJI All Rights Reserved.
Product Profile This section introduces the Phantom 3 SE and lists the components of the aircraft and remote controller. © 2017 DJI All Rights Reserved.
Product Profile Introduction The Phantom 3 SE represents the next generation of DJI quadcopters. It is capable of capturing 4K video and transmitting an HD video signal out of the box. The built-in camera has an integrated gimbal to maximize stability while minimizing both weight and size. Even when no GPS signal is available, the Vision Positioning System allows the aircraft to hover accurately in place.
Phantom 3 SE User Manual Attaching the Propellers Mount the propellers with black nuts on to motors with black dots and spin counter-clockwise to secure. Mount the propellers with sliver nuts on to motors without dots and spin clockwise to secure. Be sure all propellers are securely in place. Product Profile Place all propellers onto the correct motors and tighten by hand to lock them in position.
Phantom 3 SE User Manual Aircraft Diagram [1] [2] [3] [4] [9] [8] [7] [5] [6] [1] GPS [2] Propeller [3] Motor Product Profile [4] Front LED Indicator [5] Landing Gear [6] Gimbal and Camera [10] [11] [12] [7] Camera Micro SD Card Slot [8] Camera Status Indicator [9] Aircraft Micro USB Port [13] [10] Aircraft Status Indicator [11] Intelligent Flight Battery [12] Vision Positioning Sensors [15] [13] Antennas [14] [14] Camera Micro USB Port [15] Link Button Remote Controller Diagram [1] Mobile Dev
Phantom 3 SE User Manual [11] Built-in Antennas Product Profile [12] Handle Bar [11] [12] © 2017 DJI All Rights Reserved.
Aircraft This section introduces the features of the Flight Controller, Vision Positioning System, and the Intelligent Flight Battery 10 © 2017 DJI All Rights Reserved.
Aircraft Flight Controller The Phantom 3 SE’s flight controller features several important upgrades, including a new flight mode. Safety modes include Failsafe and Return-to-Home. These features ensure the safe return of your aircraft if the control signal is lost. The flight controller can also save critical flight data from each flight to the onboard storage device. The new flight controller also provides increased stability and a new air braking feature.
Phantom 3 SE User Manual Aircraft Status Indicator Description Normal Alternatively Red, Green and Yellow Flash Green and Yellow Flash Alternatively Green Flashes Slowly X2 Turning On and Self Diagnostic Testing Warming Up P-mode with GPS and Vision Positioning Green Flashes Twice P-mode with Vision Positioning but without GPS Aircraft Yellow Flashes Slowly A-mode but No GPS and Vision Positioning Warning Fast Yellow Flashing Remote Controller's Signal Lost Slow Red Flashing Low Battery Warning
Phantom 3 SE User Manual Low Battery RTH The low battery level failsafe is triggered when the DJI Intelligent Flight Battery is depleted to a point that may affect the safe return of the aircraft. Users are advised to return home or land the aircraft immediately when prompted. The DJI GO app will display a notice when a low battery warning is triggered. The aircraft will automatically return to the Home Point if no action is taken after a ten-second countdown. The user can cancel the RTH procedure.
Phantom 3 SE User Manual When Critical battery level warning is triggered and the aircraft begins to land automatically, you may push the throttle upward to make the aircraft hover at its current altitude, giving you an opportunity to navigate to a more appropriate landing location. The colored zones and markers on the battery level indicator bar reflect the estimated remaining flight time. They are automatically adjusted according to the aircraft’s current location and status.
Phantom 3 SE User Manual 20 m 20 m 20 m H If the aircraft is flying under 20 meters (65 feet) and Failsafe (including 20 m Smart RTH, Lower Battery RTH ) is triggered, the aircraft will first H automatically ascend to 20 meters (65 feet) from the current altitude. You can only cancel the ascending by exiting the Failsafe. Aircraft cannot return to the Home Point when GPS signal is weak ([ ] displays grey) or unavailable.
Phantom 3 SE User Manual Follow the steps below to use Vision Positioning: 1. Toggle the S1 switch to the upper most position. 2. Place the aircraft on a flat surface. Note that the Vision Positioning system cannot work properly on surfaces without clear pattern variations. 3. Turn on the aircraft. The aircraft status indicator will flash green two times, which indicates the Vision Positioning system is ready. Gently push the throttle up to lift off and the aircraft will hover in place.
Phantom 3 SE User Manual Propellers Silver Nut Black Nut Figure Attach On Legends Motors without dots Motors with black dots Lock : Turn the propellers in the indicated direction to mount and tighten. Unlock : Turn the propellers in the indicated direction to loosen and remove. Attaching the Propellers Check that the propellers and motors are installed correctly and firmly before every flight. ONLY use original DJI propellers for a better and safer flight experience.
Phantom 3 SE User Manual DJI Intelligent Flight Battery The DJI Intelligent Flight Battery has a capacity of 4480 mAh, a voltage of 15.2 V, and a smart charge/ discharge functionality. It should only be charged using an appropriate charger that has been approved by DJI. Charger Intelligent Flight Battery Aircraft The Intelligent Flight Battery must be fully charged before using it for the first time. DJI Intelligent Flight Battery Functions 1.
Phantom 3 SE User Manual Turning ON/OFF Turning On: Press the Power Button once, then press again and hold for 2 seconds to turn on. The Power LED will turn red and the Battery Level Indicators will display the current battery level. Turning Off: Press the Power Button once, then press again and hold for 2 seconds to turn off. The battery power LED will flash when powering off the Phantom to allow automatically stopping of a recording during the event recording wasn’t stopped.
Phantom 3 SE User Manual Battery life Battery life refers to how many more times the battery can be discharged and recharged before it must be replaced. When the battery is turned off, press and hold the Power Button for 5 seconds to check the battery life.
Phantom 3 SE User Manual Battery Level Indicators While Charging LED1 LED2 LED3 LED4 Battery Level 0%~25% 25%~50% 50%~75% 75%~100% Fully Charged Aircraft Battery Protection LED Display The table below shows battery protection mechanisms and corresponding LED patterns.
Remote Controller This section describes the features of the remote controller and includes instructions for controlling the aircraft and the camera. 22 © 2017 DJI All Rights Reserved.
Remote Controller Remote Controller Profile The Phantom 3 SE remote controller is a multi-function wireless communication device that integrates the video downlink system and aircraft remote control system. The video downlink and aircraft remote control system operate at 2.4 GHz and 5.8 GHz. The battery level is displayed via LED indicators on the front panel of the remote controller. Compliance Version: The remote controller is compliant with both CE and FCC regulations.
Phantom 3 SE User Manual Controlling Aircraft This section explains how to control the orientation of the aircraft through the remote controller. The Remote Control is set to Mode 2 by default.
Phantom 3 SE User Manual Remote Controller (Mode 2) ( Aircraft Indicates Nose Direction) Remarks Moving the left stick up and down changes the aircraft’s elevation. Push the stick up to ascend and down to descend. When both sticks are centered, the Phantom 3 SE will hover in place. The more the stick is pushed away from the center position, the faster the Phantom 3 SE will change elevation. Always push the stick gently to prevent sudden and unexpected elevation changes.
Phantom 3 SE User Manual position-1/position-2/position-3 Toggle the S2 switch back and forth once to initiate Smart RTH. Use the S2 switch and the gimbal dial to link with the aircraft and reset the Wi-Fi password. Adjusting Controller Sticks Hold and twist the controller sticks clockwise or counter clockwise to adjust the length of the controller sticks. A proper length of controller sticks can improve the controlling accuracy. Remote Controller Connecting to the Wi-Fi Video Downlink: 1.
Phantom 3 SE User Manual Optimal Transmission Range Battery Level Indicator The figure below illustrates the four battery levels that are displayed by the Battery Level Indicator on the remote controller's front panel. Battery Level Indicator 25％ 50％ 75％ 100％ Always ensure the remote controller has an adequate battery level before each flight.
Phantom 3 SE User Manual Linking the Remote Controller The Phantom 3 SE is linked to the remote controller by default, and re-linking is only necessary if the remote controller is replaced with a new one. Refer to the figure below to locate the Link Button. Link Button Remote Controller Linking Procedures 1. Turn on the aircraft and press the Link Button. The button will blink red when the aircraft is ready to link. 2.
Camera and Gimbal This section provides the technical specifications of the camera and explains the gimbal’s operation modes. © 2017 DJI All Rights Reserved.
Camera and Gimbal Camera Profile The on-board camera uses the 1/2.3 inch CMOS sensor to capture video (up to 4K at up to 30fps with the Phantom 3 SE) and 12 megapixel stills. You may choose to record the video in either MOV or MP4 format. Available picture shooting modes include burst, continuous, and interval shot. A live preview of what the camera sees can be monitored on the connected mobile device via the DJI GO app.
Phantom 3 SE User Manual Camera Status Indicator Camera LED Indicator lights up after the Intelligent Flight Battery is powered on. It provides information on the working status of the camera. Camera Status Indicator Camera status System is warming up. Green flashing once Taking a single picture. Green flashing three times Taking 3 or 5 photos per shot. Slow red flashing Recording. Fast red flashing SD card error. Two red flashing Overheated Camera Solid red System error.
Phantom 3 SE User Manual Gimbal Operation Modes Two gimbal operation modes are available. Switch between the different operation modes on the camera settings page of the DJI GO app. Note that your mobile device must be connected to the remote controller for changes to take effect. Refer to the table below for details: Follow Mode The angle between gimbal’s orientation and aircraft’s nose remains constant at all times.
DJI GO App This section introduces the four main functions of the DJI GO app. © 2017 DJI All Rights Reserved.
DJI GO App Use this app to control the gimbal, camera, and other aircraft functions. The app features Equipment, Editor, SkyPixel and Me sections, which are used for configuring your aircraft, editing and sharing your photos and videos with others. Equipment Enter Camera View by tapping Camera on the DJI GO welcome screen. Camera View 1 20 2 3 READY TO GO (GPS) 09:29 4 P-GPS 5 6 7 12 8 9 61% AE 10 DJI GO App 11 19 12 18 13 14 17 D 30M H 10.0M H.S 10.0 M/S VS 2.0M/S VPS 2.
Phantom 3 SE User Manual [5] GPS Signal Strength : This icon shows the current strength of GPS signals. [6] Remote Controller Signal : This icon shows the strength of remote controller’s signal. [7] Video Downlink Signal : Shows the signal strength of the Wi-Fi Video Downlink between the aircraft and the remote controller. Tap to set the SSID and connection password for the Wi-Fi connection. [8] Battery Level : This icon shows the current battery level.
Phantom 3 SE User Manual [17] Map Display the flight path of the current flight. Tap to switch from the Camera GUI to the Map GUI. [18] Return to Home (RTH) : Initiate RTH home procedure. Tap to have the aircraft return to the last recorded home point. [19] Auto Takeoff/Landing DJI GO App / : Tap to initiate auto takeoff or landing. [20] Back : Tap to return to the main GUI. Editor An intelligent video editor is built into the DJI GO app.
Flight This section describes safe flight practices and flight restrictions. © 2017 DJI All Rights Reserved.
Flight Once pre-flight preparation is complete, it is recommended that you use the flight simulator in the DJI GO app to hone your flight skills and practice flying safely. Ensure that all flights are carried out in an open area. Flight Environment Requirements Flight 1. Do not use the aircraft in severe weather conditions. These include wind speeds exceeding 10 m/s , snow, rain and fog. 2. Only fly in open areas.
Phantom 3 SE User Manual GPS Signal Strong Blinking Green Flight Limits DJI GO app Aircraft Status Indicator Maximum Flight Altitude Aircraft's altitude cannot exceed the specified value. Warning: Height limit reached. None. Max Radius Flight distance must be within the max radius. Warning: Distance limit reached. Rapid red flashing when close to the max radius limit.
Phantom 3 SE User Manual Preflight Checklist 1. 2. 3. 4. 5. 6. Remote controller, Intelligent Flight Battery, and mobile device are fully charged. Propellers are mounted correctly and firmly. Micro SD card has been inserted, if necessary. Gimbal is functioning normally. Motors can start and are functioning normally. The DJI GO app is successfully connected to the aircraft. Calibrating the Compass Only calibrate the compass when the DJI GO app or the status indicator prompt you to do so.
Phantom 3 SE User Manual 3. Hold the aircraft vertically, with nose pointing downward, and rotate it 360 degrees around the center axis. If the Aircraft Status Indicator blinks red and yellow after the calibration procedure, move your aircraft to a different location and try again. DO NOT calibrate the compass near metal objects such as a metal bridge, cars, scaffolding.
Phantom 3 SE User Manual Starting/Stopping the Motors Starting the Motors A Combination Stick Command (CSC) is used to start the motors. Push both sticks to the bottom inner or outer corners to start the motors. Once the motors have started spinning, release both sticks simultaneously. OR Stopping the Motors Flight There are two methods to stop the motors. Method 1: When the aircraft has landed, push and hold the throttle down. The motors will stop after three seconds.
Phantom 3 SE User Manual When the Aircraft Status Indicators blink yellow rapidly during flight, the aircraft has entered Failsafe mode. A low battery level warning is indicated by the Aircraft Status Indicators blinking red slowly or rapidly during flight. Watch our video tutorials for more flight information. Video Suggestions and Tips 1. Go through the full pre-flight checklist before each flight. 2. Select the desired gimbal operation mode in the DJI GO app. 3. Only shoot video when flying in P-mode.
Appendix 44 © 2017 DJI All Rights Reserved.
Appendix Specifications Aircraft Weight (Battery & Propellers Included) 1236 g Max. Ascent Speed 5 m/s Max. Descent Speed 3 m/s Max. Speed 16 m/s (ATTI mode, no wind) Max Service Ceiling Above Sea Level 6000 m (Software altitude limit: 120 m above takeoff point) Max. Flight Time Approximately 25 minutes Operating Temperature 0°C to 40°C GNSS GPS+GLONASS Operating Frequency 2.400-2.4835 GHz; 5.725-5.850 GHz Transmitter Power (EIRP) Gimbal Controllable Range 2.
Phantom 3 SE User Manual Remote Controller Operating Frequency Transmitter Power (EIRP) 2.400-2.483 GHz; 5.725-5.85 GHz 2.4 GHz: ≤27 dBm (FCC); ≤20 dBm (SRRC); ≤20 dBm (CE) 5.8 GHz: ≤30 dBm (FCC); ≤26 dBm (SRRC); ≤14 dBm (CE) 2.4 GHz: 0.6 mi (1000 m, FCC); 0.3 mi (500 m, SRRC); Max Transmission Distance 0.3 mi (500 m, CE) (Unobstructed and free of interference) 5.8 GHz: 2.5 mi (4000 m, FCC); 1.
Phantom 3 SE User Manual Firmwares Update Connect to the Internet, launch the DJI GO app. The DJI GO app will start checking for available firmware updates automatically. Follow the on-screen instruction to update the latest firmware for the aircraft, remote controller and intelligent flight battery. Intelligent Flight Mode Intelligent Flight mode includes Course Lock, Home Lock, Point of Interest (POI), Follow Me and Waypoints features to assist users to create professional shoots during the flight.
If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. © 2017 DJI All Rights Reserved.
