User manual

Remote Controller
©
2017 DJI All Rights Reserved.
23
Remote Controller
Remote Controller Prole
The Phantom 3 SE remote controller is a multi-function wireless communication device that integrates the
video downlink system and aircraft remote control system. The video downlink and aircraft remote control
system operate at 2.4 GHz and 5.8 GHz. The battery level is displayed via LED indicators on the front
panel of the remote controller.
Compliance Version:
The remote controller is compliant with both CE and FCC regulations.
Operating Mode:
Control can be set to Mode 1, Mode 2 or Mode 3 or to a custom mode.
Mode 1:
The right stick serves as the throttle.
Mode 2:
The left stick serves as the throttle.
Using the Remote Controller
Turning the Remote Controller On and Off
The Phantom 3 SE remote controller is powered by a rechargeable battery that has a capacity of
2600 mAh. The battery level is indicated via the Battery Level LEDs on the front panel.
1. Slide the power switch to the right to turn on the remote controller.
2. The Status LED will light up solid green when the remote controller is connected to the aircraft. The
Battery Level Indicators will display the battery level of the remote controller.
Charging the Remote Controller
Charge the remote controller through the Micro USB port using the provided Micro USB cable.
标配充电器完全充满约需1.5小时
取出智能飞行电池
交流电源
100~240 V
USB充电器完全充满约需2.5小时
（ 充电电流为 1.5A 时）
USB Adapter Charge Time:
~2.5 hours (when charging at 1.5 A)