User manual

Remote Controller
©
2017 DJI All Rights Reserved.
25
Phantom 3 SE User Manual
Remote Controller
(Mode 2)
Aircraft
( Indicates Nose Direction)
Remarks
Moving the left stick up and down changes the
aircraft’s elevation.
Push the stick up to ascend and down to descend.
When both sticks are centered, the Phantom 3 SE
will hover in place.
The more the stick is pushed away from the center
position, the faster the Phantom 3 SE will change
elevation. Always push the stick gently to prevent
sudden and unexpected elevation changes.
Moving the left stick to the left or right controls the
rudder and rotation of the aircraft.
Push the stick left to rotate the aircraft counter-
clockwise, push the stick right to rotate the aircraft
clockwise. If the stick is centered, the Phantom 3 SE
will maintain its current orientation.
The more the stick is pushed away from the center
position, the faster the Phantom 3 SE will rotate.
Moving the right stick up and down changes the
aircraft’s forward and backward pitch.
Push the stick up to fly forward and down to fly
backward. Phantom 3 SE will hover in place if the
stick is centered.
Push the stick further away from the center position for a
larger pitch angle (maximum 30˚) and faster ight.
Moving the right stick control left and right changes
the aircraft’s left and right pitch.
Push left to y left and right to y right. The Phantom
3 SE will hover in place if the stick is centered.
Gimbal Dial: Turn the dial to the right, and the
camera will shift to point upwards. Turn the
dial to the left, and the camera will shift to point
downwards. The camera will remain in its current
position when dial is static.
position-1/position-2/position-3
Toggle the S1 switch back and forth to regain the
control of the aircraft during Failsafe RTH.
Toggle the S1 switch back and forth for more than 3
times to calibrate the aircraft’s compass.
Toggle the S1 switch to position 1 to enable P-Mode,
to position 2 to enable A-Mode, and to position 3 to
enable F-Mode.