User manual

Remote Controller
26
©
2017 DJI All Rights Reserved.
Phantom 3 SE User Manual
Wi-Fi
Settings
Wi-Fi
CHOOSE A NETWORK...
PHANTOM3SE-XXXXXX
i
i
i
Other...
Ask to Join Networks...
Known networks will be joined automatically. If no
known networks are available, you will have to manually
select a network.
Enable Wi-Fi
Select
‘PHANTOM3SE-XXXXXX’
Resetting the Wi-Fi Video Downlink
Switch on the remote controller, turn the gimbal dial to the far right, and toggle the S2 switch back and
forth for at least three times. The remote controller's status LED will blinks green and red alternatively
fast if the SSID and password for the Wi-Fi Video Downlink have been reset to their default values
successfully.
Once connected, you are advised to change the SSID and password by tapping in
Camera view.
position-1/position-2/position-3
Toggle the S2 switch back and forth once to initiate
Smart RTH. Use the S2 switch and the gimbal dial
to link with the aircraft and reset the Wi-Fi password.
Adjusting Controller Sticks
Hold and twist the controller sticks clockwise or counter clockwise to adjust the length of the controller
sticks. A proper length of controller sticks can improve the controlling accuracy.
Connecting to the Wi-Fi Video Downlink:
1. Switch on the remote controller.
2. Turn on the aircraft.
3. On your mobile device, select ‘PHANTOM3SE-XXXXXX’ from the Wi-Fi network list, and enter the
default password ‘12341234’.
4. Launch the DJI GO app and enter Camera View. A video signal from the aircraft’s camera indicates
that the aircraft has established a connection to the Wi-Fi video downlink successfully.
Position- 3
Position- 1
S2 Switch