Operation Manual

Aircraft

Phantom 3 Standard

User Manual

ChargerIntelligent Flight Battery

Power Outlet

Battery Level Indicators while Charging

LED1 LED2 LED3 LED4 Battery Level

0%~25%

25%~50%

50%~75%

75%~100%

Fully Charged

Battery Protection Mechanism

The table below shows the LED blinking patterns and their corresponding battery protection warning.

Battery Level Indicators while Charging

LED1 LED2 LED3 LED4 BlinkingPattern Battery Protection Warning

LED2 blinks twice per second Over current detected

LED2 blinks three times per second Short circuit detected

LED3 blinks twice per second Overcharge detected

LED3 blinks three times per second Charger overvoltage detected

LED4 blinks twice per second

Charging temperature is too low

(<0°C)

LED4 blinks three times per second

Charging temperature is too high

(>40°C)

Charging the Intelligent Flight Battery

1. Connect the battery charger to a suitable power supply (100-240V, 50/60Hz).

2. Open the protection cap on the battery charger and connect it to the Intelligent Flight Battery. If the

battery level is above 95%, turn on the battery before charging, otherwise it will not be fully charged.

3. The Battery Level Indicator will display the current battery level as it is charging.

4. The Battery Level Indicators will turn off when charging is complete. Disconnect the Intelligent Flight

Battery from the battery charger.

Always turn off the Intelligent Flight Battery before inserting it into or removing it from the aircraft.

Air cool the Intelligent Flight Battery after each flight. Allow its temperature to drop to room

temperature before charging it.