Operation Manual

Appendix

Phantom 3 Standard

User Manual

Intelligent Orientation Control (IOC)

IOC allows the pilot to lock the orientation of aircraft in different fashions. It has three working modes you

can choose from in the DJI GO app. IOC only works in F-Mode, and you must toggle the S1 switch to the

F-Mode (lowest position) to activate IOC. The three work modes are:

Course Lock (CL)

Lock the current nose direction as the aircraft’s forward direction. The aircraft

will move in the locked directions regardless of its orientation (yaw angle). Tap

Reset IOC to reset the Course Lock.

Home Lock (HL)*

Record a Home Point, and push the Pitch stick up/down to control the

distance of the aircraft from the Home Point.

Point of Interest (POI)*

Record a Point of Interest (POI). The aircraft’s nose always points towards the

POI.

*The Home Lock and Point of Interest modes are due for release soon.

IOC Requirements

IOC will only work under the following conditions:

IOC Mode

GPS Enabled Satellite Count Aircraft Distance

Course Lock No None Any

Home Lock Yes Aircraft

≥10m

Home Point

POI Yes Aircraft

5m-500m

Point of Interest

Enabling IOC

Launch the DJI GO app > Camera View > > Advanced Settings > Enable IOC. On the remote

controller, toggle the S1 Switch to the lowest position (F-Mode) to use IOC.